- Clean the tray home position sensor (P18) or replace it .
- Check the tray lift mechanism.
- check the finisher controller PCB
- Check wiring from the finisher controller PCB to the lift motor.
- replace lift motor (M5)
- Clean the tray home position sensor (P18) or replace it .
- Check the tray lift mechanism.
- check the finisher controller PCB
- Check wiring from the finisher controller PCB to the lift motor.
- replace lift motor (M5)
Just a question. When you swich on the machine what happens. Does the trays try to move (find home position) or does the machine give you E 540 straight away ??
Regards
[SIGPIC][/SIGPIC]
Life is a Journey enjoy the ride !!!
E540 Error Code
It may be necessary to perform the height sensor adjustment.
Follow procedure below:
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks