Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Sep 2007
    Location
    collinsville
    Posts
    7
    Rep Power
    0

    Canon IR2830 error 000007-0000

    Can anybody tell me what this error 000007-0000 is indicating. Internet says fixing film error. What usually causes the problem.

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Oct 2010
    Location
    Kampala, Uganda
    Posts
    860
    Rep Power
    40

    Re: Canon IR2830 error 000007-0000

    Quote Originally Posted by poco View Post
    Can anybody tell me what this error 000007-0000 is indicating. Internet says fixing film error. What usually causes the problem.
    The answer from the Internet is correct. An error int he rotation of the fixing film is detected. The reading of the main Thermistor is 100 deg Centigrade or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the motor is driven.

    The main cause: Either, Fixing film sensor is faulty or the DC Controller.
    BUT it is advisable to First Try to Clear the the error in Service mode: Press the * (Additional functions) key,
    > press (2,8) key at the same time, > Press * (Additional function) key again. Then press COPIER> FUNCTION>CLEAR>ERROR. Then power cycle (restart) the machine and see if the error is cleared. If not try to replace the fixing film.

  3. #3
    Technician
    Join Date
    Oct 2012
    Location
    Mumbai,Maharashtra
    Posts
    14
    Rep Power
    24

    Re: Canon IR2830 error 000007-0000

    Hi,

    This error is related to fixing film rotation.

    You have to first check the film condition.It would be the problem fixing film rotation failure.

  4. #4
    Senior Tech 250+ Posts montana's Avatar
    Join Date
    Aug 2008
    Location
    benghazi
    Posts
    394
    Rep Power
    0

    Re: Canon IR2830 error 000007-0000

    Quote Originally Posted by poco View Post
    Can anybody tell me what this error 000007-0000 is indicating. Internet says fixing film error. What usually causes the problem.
    hi...it is the fixing film rotation failure...also the film patch sensor causes this error code...wish you good luck

  5. #5
    Senior Tech 100+ Posts Matoku's Avatar
    Join Date
    Feb 2008
    Location
    sabah
    Posts
    172
    Rep Power
    34

    Re: Canon IR2830 error 000007-0000

    Hi there. 1st it can be the fixing film itself torn at the sensing white edge side. 2nd it can be the fixing film it self not rotate either due to the pressure roller poor ro the fixing film lubricant dry out. 3rd it can be the fixing film sensor defect or the harness problem. But normally if you using the non ginuine fixing unit it due to the fixing film doesn't rotate because of the Lubricant (grease) inside of the fixing film. Good luck.

  6. #6
    Senior Tech 100+ Posts arielcanon's Avatar
    Join Date
    Mar 2012
    Location
    PVJ
    Posts
    106
    Rep Power
    26

    Re: Canon IR2830 error 000007-0000

    contact trained technician...,
    Learning never ends..
    Never give up, where there is a wheel there is a way..

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here