Thanks: 
Likes: 
Dislikes: I have IRADVC5030 upon changing drums uinable to autograd correctly. The PG10 and PG1 in the process of autograd still have the pattern of the patch also on the PG10 and PG1 pages. Anyone with a fix should please help out. Thanks
I have IRADVC5030 upon changing drums uinable to autograd correctly. The PG10 and PG1 in the process of autograd still have the pattern of the patch also on the PG10 and PG1 pages. Anyone with a fix should please help out. Thanks
post the prints to view !!!!Originally Posted by rayjeek
proper sequence to calibrate copier and imagePASS/ ColorPASS
sequence is to do an AUTO COLOR MISMATCH first, then a CORRECT SHADING, followed by a full AUTO GRADATION, then COLOR CALIBRATION for the image/color PASS.
CORRECT SHADING and COLOR CALIBRATION should be performed using a Spectrophotometer if available-
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Will try that and give a feed back. Thanks
Any feedback????
---------------------------------------------------
post from year 2012 !!!
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Sorry for waiting so long. Firmware upgrade sorted the problem. Thanks
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Posting Permissions
Reply With Quote
Bookmarks