Hi,
I have Canon IR 4570 copier. I have changed the fuser fixing film last week. Right now, i m facing paper jams problem after changing the film. Can anyone suggest me what to do. Thanks
Hi,
I have Canon IR 4570 copier. I have changed the fuser fixing film last week. Right now, i m facing paper jams problem after changing the film. Can anyone suggest me what to do. Thanks
Hi there, There is no error code at all. I did change the film as it didn't fuse properly (easily can wipe out the toner with hand). No error code was showing on the panel. After chaning, Copy 1 or 2 pages is ok. But paper jam occured when continuous copying. I think that my way of doing was wrong. Tuanks for help.
Jams are in service mode. Did you clean off the old grease and apply new grease? Is the fuser pressure on?
My advice
Follow PDF procedure..........procedure.pdf
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
If you have replace the fixing film only, put 10 drops of fuser oil/silicon oil on the fixing heater element so it will lubricate the new film and causing it to turn smoothly.
Jamming is caused mostly because the film does not turn.
As Rachid.Akli says if you use Genuine Canon fixing film unit you won't have any jamming poor fixing issues, the non OEM films are just not worth using on this model especially as the genuine Canon ones last over 250k I have many that do 500k!
Bookmarks