Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    Field Supervisor 500+ Posts Rachid.Akli's Avatar
    Join Date
    Oct 2011
    Location
    Algiers
    Posts
    597
    Rep Power
    34

    Re: UST= User Support Tool Information

    Hello,

    There is no HDD.

    Rachid.
    "Find a job you love and you’ll never have to work a day in your life." Nagy's father

  2. #12
    Service Manager 10,000+ Posts
    UST= User Support Tool Information

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: UST= User Support Tool Information

    Quote Originally Posted by Rachid.Akli View Post
    Hello everyone,

    I have an IR2420 displaying something related to a "BIOS" (sorry, i don't remember the exact message) . I tried to download system using the UST and an USB connexion as the machine doesn't have a network connexion by default. I got the a message requiring an IP address input. I supposed that the image processing PCB is faulty and doesn't allow data transfer. I solved the issue by replacing the main controller.

    Is there any other experience about this ?


    Rachid.
    -----------------------------------------------------------

    u should not be receiving message about IP address

    -u must have printer off
    connect laptop to printer>then open/start up UST
    -now power up printer
    if a found new hardware pops up >select cancel

    Press the Additional Functions key on the control panel of this machine to enter into the user mode.
    -Press the down-arrow key to select "System Settings", and then press the OK key.
    -Press the down-arrow key to select "Update Firmware", and then press the OK key.
    -When "OK to update" appears, select “Yes” and then press the OK key.
    -When "PLEASE WAIT WAITING" appears, start the UST.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #13
    ziribe
    Guest

    Re: UST= User Support Tool Information

    i have message *mode bios " ir2422 please help me

  4. #14
    Winston
    Guest

    Re: UST= User Support Tool Information

    I have a problem with the printer Canon IR2318. Please tell me where to get UST?

  5. #15
    Winston
    Guest

    Question Re: UST= User Support Tool Information

    I have a problem with the printer Canon IR 2318. Please tell me where to get UST application?

  6. #16
    KhaledAlorofi
    Guest

    Re: UST= User Support Tool Information

    please can you send me this file iR2520_30-V0023-UST-boot.exe
    khaled.kps@gmail.com

    i need to update my Canon IR2520 Firmware

  7. #17
    scyrius
    Guest

    Re: UST= User Support Tool Information

    pleace can you send me this file iR2520_30-V0023-ust-boot.exe

    my mail: asdcv1995@gmail.com

    thanks a lot!

  8. #18
    Trusted Tech 50+ Posts mdm7266's Avatar
    Join Date
    Dec 2007
    Posts
    99
    Rep Power
    34

    Re: UST= User Support Tool Information

    Quote Originally Posted by teckat View Post
    UST Firmware is in the Models UST Firmware Folder location--

    in an EXAMPLE as shown below

    C:\Canon File Folder\SST System Software Folder\UST Files\CiRC1022_v61.01.01


    UST Firmware Models/ & also used in their compatible Euro models

    CiR LBP5280
    CiR LBP5460
    CiR LBP5480
    iR LBP3460
    iR LBP3470
    iR LBP3480
    iR LBP3560
    iR LBP3580
    CiR C1022/C1022i
    CiR C1030/C1030iF
    iR 1730/1740/1750
    iR 2545/2535/2530/2525
    LC 810/830i
    hello. can you please give me a copy of ust firmware or the tools needed for my ir2545. my ir2545 cannot start/boot. cannot enter service mode. i will try to reprogram.

  9. #19
    Service Manager 10,000+ Posts
    UST= User Support Tool Information

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: UST= User Support Tool Information

    Quote Originally Posted by mdm7266 View Post
    hello. can you please give me a copy of ust firmware or the tools needed for my ir2545. my ir2545 cannot start/boot. cannot enter service mode. i will try to reprogram.





    What is your scenario ( series of actions and events ) on printer


    Blank display
    green led on and no cycle of engine




    On a fully working device, J8125 (Main Controller) measures as follows:

    Pin 1 - 0v 7 - 5v
    2 - 3.2v 8 - 5v
    3 - 3.2v 9 - 5v
    4 - 0v 10 - 0v
    5 - 0v 11 - 24v
    6 - 0v

    When the iR is in Blank display, green led on and no rotation or if DC Controller or Boot Rom is defective or J210 or J8112 is not connected.
    J8125 measures as follows:

    Pin 1 - 0v 7 - 5v
    2 - 3.2v 8 - 0v
    3 - 3.3v 9 - 0v
    4 - 0v 10 - 0v
    5 - 0v 11 - 0v
    6 - 0v



    If the imageRUNNER is in the Blank Display state and listed voltage is missing on J8125, there is no way to isolate the issue to one of the listed components.

    Start with cleaning and re-seating the Boot Rom, reseat connectors J210, J8112 & J8125, cut any wire ties on the related harness.

    This instance of the Blank Display was resolved by replacing the Boot Rom.

    Part number for the Boot Rom: FM1-B884-000
    Attached Files Attached Files
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #20
    Trusted Tech 50+ Posts mdm7266's Avatar
    Join Date
    Dec 2007
    Posts
    99
    Rep Power
    34

    Re: UST= User Support Tool Information

    Quote Originally Posted by teckat View Post





    What is your scenario ( series of actions and events ) on printer


    Blank display
    green led on and no cycle of engine




    On a fully working device, J8125 (Main Controller) measures as follows:

    Pin 1 - 0v 7 - 5v
    2 - 3.2v 8 - 5v
    3 - 3.2v 9 - 5v
    4 - 0v 10 - 0v
    5 - 0v 11 - 24v
    6 - 0v

    When the iR is in Blank display, green led on and no rotation or if DC Controller or Boot Rom is defective or J210 or J8112 is not connected.
    J8125 measures as follows:

    Pin 1 - 0v 7 - 5v
    2 - 3.2v 8 - 0v
    3 - 3.3v 9 - 0v
    4 - 0v 10 - 0v
    5 - 0v 11 - 0v
    6 - 0v



    If the imageRUNNER is in the Blank Display state and listed voltage is missing on J8125, there is no way to isolate the issue to one of the listed components.

    Start with cleaning and re-seating the Boot Rom, reseat connectors J210, J8112 & J8125, cut any wire ties on the related harness.

    This instance of the Blank Display was resolved by replacing the Boot Rom.

    Part number for the Boot Rom: FM1-B884-000

    This is what happen. Ir2545
    At first its intermittent error 248. at first error is cleared by power off-on. then suddenly at power on the machine cannot start-up or boot. the green light on the control panel is ON, the canon logo appears on the display. (you can hear the machine motors rotate then stop) The progress bar on the canon logo STOPS at the middle and stays there, as it hangs there.
    Action taken: reseat boot rom, reseat plugs on terminals of dc con and main. still the same problem.
    Do you think i need to flash or reprogram the machine?

    i encounter same symptoms with a konica 7033 before and i solved it by reprogramming or re install the firmware. But this time it is a CAnon IR2545

    By the way, i have also a IR 2530. are the boot rom of IR 2530 and IR 2545 the same. I have not yet open the ir2530 to compare their part numbers?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here