Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 42
  1. #31
    Trusted Tech 50+ Posts
    Join Date
    Mar 2017
    Location
    bloemfontein
    Posts
    91
    Rep Power
    15

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    we get it a lot.all info from the drum is stored on the chip.surface of drum etc.hence the reason if you go look at the life the old drums life will be still there.
    we have now stopped swoping chips.anyway its easier taking laser out and cleaning it.on theses machines that should be part of the normal cleanining of mc.
    you will notice that life of the drum will drop down a lot.(if you are lucky enough not to get issue)

  2. #32
    Senior Tech 250+ Posts JPiek's Avatar
    Join Date
    Oct 2014
    Location
    The Netherlands
    Posts
    435
    Rep Power
    27

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    I allso said if all recommanded solutions fail...
    Johan

  3. #33
    Technician
    Iradvc2025 error code e020-1360 after replacing bk drum


    Join Date
    Aug 2015
    Location
    London
    Posts
    38
    Rep Power
    18

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    Quote Originally Posted by MFPTech View Post
    Tried cleaning the laser, didn't solve the problem, will try replacing it and the patch sensor Assy. It looks like i did something wrong, it was working before i replaced the Bk Drum and it doesn't work even if i put the old drum back Please don't say that Canon machines are the best because they are not!

    Hiya,

    Have you swapped the chips on the drums ?ie Put old chip on new drum ?

  4. #34
    Senior Tech 250+ Posts MFPTech's Avatar
    Join Date
    Nov 2010
    Location
    Surrey
    Posts
    486
    Rep Power
    33

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    Quote Originally Posted by duwaynebrooks View Post
    Hiya,

    Have you swapped the chips on the drums ?ie Put old chip on new drum ?
    You are right, that was the solution in more than 3 occasions. Forget about the service manual, it will confuse you
    Thanks!

    Sent from my SM-G900W8 using Tapatalk

  5. #35
    Service Manager 5,000+ Posts
    Iradvc2025 error code e020-1360 after replacing bk drum

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    Does anyone have any new info on this issue?
    Saw an irac2225 today, its been running great for months, I attended for jamming (worn fuser) I fitted a new one all good but drum was at 120% while I was on site fitted a new k drum it threw e020-1360.

    I checked all the usual, cleaned optics, removed & cleaned laser & patch sensors, ssw is current. Even fitted another new drum, same issue, only option was to sawp the black drum chip now all good but as it has been said not an actual fix.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  6. #36
    Service Manager 10,000+ Posts
    Iradvc2025 error code e020-1360 after replacing bk drum

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    Quote Originally Posted by copier tech View Post
    Does anyone have any new info on this issue?
    Saw an irac2225 today, its been running great for months, I attended for jamming (worn fuser) I fitted a new one all good but drum was at 120% while I was on site fitted a new k drum it threw e020-1360.

    I checked all the usual, cleaned optics, removed & cleaned laser & patch sensors, ssw is current. Even fitted another new drum, same issue, only option was to sawp the black drum chip now all good but as it has been said not an actual fix.



    the only latest Canon pub on this error was in Apr 19 2017


    Error :

    E020-1360 Error Code after replacement of the black drum.
    Description: Abnormal detected patch reading value. Light patch although setting 7 for patch level (unable to fit in the target between 550 and 640).

    The polygon mirror for the lasers was cleaned, no change. If the old drum is installed, no code. The code is present on boot up.


    Workaround :

    Had tech install the new drum, went in to Service Mode and did a DC Controller backup. Then, did a DC Controller clear and rebooted. Doing the DC Controller Clear resolved the E020-1360 Error Code.

    Note: Because the DC Controller Clear resolved the Error Code, a restore was not performed. It was suggested to enter the Door Specification which is located above the toner bottles and do a Full Auto Gradation along with an Auto Color Correct Mismatch.

    The DC Controller Clear was only suggested once it was known that the Laser Polygon mirror was cleaned.


    See attached Technical Publication on cleaning the Laser Polygon mirror.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #37
    Senior Tech 250+ Posts JPiek's Avatar
    Join Date
    Oct 2014
    Location
    The Netherlands
    Posts
    435
    Rep Power
    27

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    The pub assumes it's in de DC controller, why does the error disapear if you reseat the old drum or swap the chip ?
    Why doesn't the error come back if you swap the drum the next time : ie if the new one with the old chip is worn/gives lines ?
    Why does it sometimes disapear if you swap the new drum for another new drum ?

    For me, still too much "sometimes this works, sometimes another thing works..."....

    In practice : I clean laser and mirrors, if that doesn't work i swap with another drum, if that doesn't work or I don't have one, I shrug and swap the chip.
    It'll solve itself with the next drum swap.
    Johan

  8. #38
    Service Manager 5,000+ Posts
    Iradvc2025 error code e020-1360 after replacing bk drum

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    Exactly, i've spent a lot of time updating SSW, replacing a new laser, new ITB & ALL drums only for it not to sort the issue, simply swapping the drum chip does!
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  9. #39
    Senior Tech 250+ Posts JPiek's Avatar
    Join Date
    Oct 2014
    Location
    The Netherlands
    Posts
    435
    Rep Power
    27

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    Is it just coincidence the black drum is also the worst in CQ and it's Life % ? I don''t think so... I think the black drum should be called the Brown drum because it's a piece of sh*t....
    Johan

  10. #40
    Service Manager 10,000+ Posts
    Iradvc2025 error code e020-1360 after replacing bk drum

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Iradvc2025 error code e020-1360 after replacing bk drum

    Canon Engineering at it's Worst Safety no brain.JPG
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here