Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Field Supervisor 500+ Posts
    Canon IR C 5180 Error Code 000007-0211


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    Canon IR C 5180 Error Code 000007-0211

    I am having trouble understanding this code. Assuming this is in the fuser area.Can't find much on this...
    Anyone have the exact meaning of this code...

  2. #2
    Senior Tech 250+ Posts
    Canon IR C 5180 Error Code 000007-0211


    Join Date
    Apr 2008
    Location
    las vegas,nv.
    Posts
    420
    Rep Power
    0

    Re: Canon IR C 5180 Error Code 000007-0211

    Fuser belt problem, there isn't much you can do with these fusers, but replace to fix problem. If im correct Canon sells these refurbished for $800.00.

  3. #3
    Service Manager 10,000+ Posts
    Canon IR C 5180 Error Code 000007-0211

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR C 5180 Error Code 000007-0211

    Quote Originally Posted by pontiac View Post
    Fuser belt problem, there isn't much you can do with these fusers, but replace to fix problem. If im correct Canon sells these refurbished for $800.00.
    sell only to authorized dealers
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Service Manager 10,000+ Posts
    Canon IR C 5180 Error Code 000007-0211

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR C 5180 Error Code 000007-0211

    Quote Originally Posted by pontiac View Post
    Fuser belt problem, there isn't much you can do with these fusers, but replace to fix problem. If im correct Canon sells these refurbished for $800.00.
    READ PDF/--5185_007 Checks.pdf



    Disassembling and Reassembling_Fixing Unit_TP07-168.pdf

    this other pdf shows/Disassembling and Reassembling Fix Unit> and shows parts> these parts usually do not fix all issues for E007>it's like Trial & Error that does not pay in long run-
    TIME is MONEY in this field

    but as stated> your best bet is to replace unit
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Senior Tech 250+ Posts
    Canon IR C 5180 Error Code 000007-0211


    Join Date
    Apr 2012
    Location
    Brisbane
    Posts
    349
    Rep Power
    28

    Re: Canon IR C 5180 Error Code 000007-0211

    i know this is an old thread, but i've had two machines with this problem recently & thought i'd share my remedy for future reference

    from what i understand this code actually refers to the fuser not moving at the same speed as the machine, though this actual code was not listed in the service manual (iRC5180/5180i/4580/4580i/4080/4080i/3880 CLC5151/4040/4080i)

    on both machines, i found there are two worn straight-cut hardened gears deep inside, on the copier front-side of the fuser unit, between the upper & lower belt assemblies,, which drive the lower belt assembly from the upper belt shaft (you will not see these gears in any parts diagram)

    i dismantled the entire fuser unit (an hour +), removed both belt assemblies, removed & reversed the 2 worn gears applying liberal high temp lithium grease, then reassembled & refitted the fuser - this got the machine up and running in around 2.5 hrs to the great relief of my client

    seeing everything else in these fusers looked kinda like new (shiny unwrinkled belts), i had 4 gears cut & hardened by a local engineering firm (using a gear i removed from an old fuser unit) which cost me $90.00 each & then went through the entire process again to fit the new gears - heck of alot cheaper than 2 new fuser units

    NOTE - this is not a job for your standard copier tech, i have 30+ yrs experience (mechanical, electrical & electronics to component level), 18 yrs in business for myself & i also subcontract to top end manufacturers when their guys run into problems - that being said, a GOOD tech,, with patience and great care, can do this job and have the machine up and running again in approx 3 hrs

  6. #6
    Service Manager 10,000+ Posts
    Canon IR C 5180 Error Code 000007-0211

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR C 5180 Error Code 000007-0211

    Quote Originally Posted by aAandy View Post
    i know this is an old thread, but i've had two machines with this problem recently & thought i'd share my remedy for future reference

    from what i understand this code actually refers to the fuser not moving at the same speed as the machine, though this actual code was not listed in the service manual (iRC5180/5180i/4580/4580i/4080/4080i/3880 CLC5151/4040/4080i)

    on both machines, i found there are two worn straight-cut hardened gears deep inside, on the copier front-side of the fuser unit, between the upper & lower belt assemblies,, which drive the lower belt assembly from the upper belt shaft (you will not see these gears in any parts diagram)

    i dismantled the entire fuser unit (an hour +), removed both belt assemblies, removed & reversed the 2 worn gears applying liberal high temp lithium grease, then reassembled & refitted the fuser - this got the machine up and running in around 2.5 hrs to the great relief of my client

    seeing everything else in these fusers looked kinda like new (shiny unwrinkled belts), i had 4 gears cut & hardened by a local engineering firm (using a gear i removed from an old fuser unit) which cost me $90.00 each & then went through the entire process again to fit the new gears - heck of alot cheaper than 2 new fuser units

    NOTE - this is not a job for your standard copier tech, i have 30+ yrs experience (mechanical, electrical & electronics to component level), 18 yrs in business for myself & i also subcontract to top end manufacturers when their guys run into problems - that being said, a GOOD tech,, with patience and great care, can do this job and have the machine up and running again in approx 3 hrs
    -----------------------------------------------------------------------------------------------------------------------


    Good Information

    Now Post the pictures & exact location of these mystery gearsI have worked on hundreds of these units/ also once had to maintain a major account that had 130 in one building.

    The reason we don't fuss with these units is because in a fast paced high end customers location> u don't normally have the time and space to break down this unit to do a visual inspect on site--
    another reason is there are small gears on side assembly's that have their teeth edges broken (some not visible until removal).
    U also have the cases of a upper torn belt - or fried sensor surfaces-

    we keep these units in stock for a same day delivery response repair/ pop out>pop it
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Field Supervisor 500+ Posts
    Join Date
    Oct 2010
    Location
    Kampala, Uganda
    Posts
    860
    Rep Power
    40

    Re: Canon IR C 5180 Error Code 000007-0211

    Both of you (aAandy & teckat), have valid points. Talk of workshop versus field repair, as well as time factor. Then there's the type of client as well as the money factor.

  8. #8
    Field Supervisor 500+ Posts
    Canon IR C 5180 Error Code 000007-0211


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    Red face Re: Canon IR C 5180 Error Code 000007-0211

    Quote Originally Posted by aAandy View Post
    i know this is an old thread, but i've had two machines with this problem recently & thought i'd share my remedy for future reference

    from what i understand this code actually refers to the fuser not moving at the same speed as the machine, though this actual code was not listed in the service manual (iRC5180/5180i/4580/4580i/4080/4080i/3880 CLC5151/4040/4080i)

    on both machines, i found there are two worn straight-cut hardened gears deep inside, on the copier front-side of the fuser unit, between the upper & lower belt assemblies,, which drive the lower belt assembly from the upper belt shaft (you will not see these gears in any parts diagram)

    i dismantled the entire fuser unit (an hour +), removed both belt assemblies, removed & reversed the 2 worn gears applying liberal high temp lithium grease, then reassembled & refitted the fuser - this got the machine up and running in around 2.5 hrs to the great relief of my client

    seeing everything else in these fusers looked kinda like new (shiny unwrinkled belts), i had 4 gears cut & hardened by a local engineering firm (using a gear i removed from an old fuser unit) which cost me $90.00 each & then went through the entire process again to fit the new gears - heck of alot cheaper than 2 new fuser units

    NOTE - this is not a job for your standard copier tech, i have 30+ yrs experience (mechanical, electrical & electronics to component level), 18 yrs in business for myself & i also subcontract to top end manufacturers when their guys run into problems - that being said, a GOOD tech,, with patience and great care, can do this job and have the machine up and running again in approx 3 hrs
    Thanks so much for this... Good stuff

  9. #9
    Service Manager 10,000+ Posts
    Canon IR C 5180 Error Code 000007-0211

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR C 5180 Error Code 000007-0211

    Please Post the pictures & exact location of these mystery gears

    plus pics of your cut stamped replacements
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #10
    Technician
    Join Date
    Jul 2015
    Posts
    24
    Rep Power
    18

    Re: Canon IR C 5180 Error Code 000007-0211

    I have fixed this error on the Canon iR C4080.

    Error Code 000007-0211 means the lower fuser belt is not centered and to the left.

    Error Code 000007-0201 means the lower fuser belt is not centered and to the right.

    7-0211-0201.jpg
    7-0211-0201.pdf

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here