Originally Posted by
teckat
Service Mode>SCAN>SCAN READER>OPTION>BODY>SENS CNF = 1
Power cycle machine.
To make the value of SENS-CNF stick after the Copier is rebooted, the following needs to be set in service mode.
SCAN > SCAN SW > SW06 > Bit2 to 1
Also, to enable the correct paper selection, change the following setting of the paper size
group.
SYSTEM > SYSTEM Numeric > 057 to 3 for inch configuration
1: AB configuration
2: A configuration
3: Inch configuration
4: AB / Inch configuration
Bookmarks