c7055

[dckm]

New to canon. What is a

E000008-0001 Error Code? I have a service manual, and can get into service mode. I can't find this error listed. How do I read the code? My error listing is like: E000 then 0001 how do you determine what the code means? Thanks

[fragol]

Hi

The "E008" is the main code and the "0001-05" is the subcode for the E008.

Here is the error description of the service manual:
"E008-0001-05
Title: Pressure belt unit life detection error
Description of detection:
The amount of fixing motor current reached the specified
value due to torque-up of the pressure belt.
Measures:
1. Confirm the current value is 80 (0.8 A) and below on
the service mode (COPIER> DISPLAY> FIXING> FXMTR8).
A. In case that the current value is “smaller than
80”
A-1. The pressure belt unit reaches to its life ->
replace the pressure belt unit
A-2. Faulty fixing unit drive gear -> replace the
gear
A-3. Fault fixing motor (M48)
B. In case that the current value is “80 and larger”
B-1. Faulty fixing unit drive gear -> replace the
gear
B-2. Faulty fixing motor (M48) -> replace the
fixing mtoor
B-3. Fault relay PCB -> replace it
2. Clear the current value log of fixing motor on the
service mode (COPIER> FUNCTION> CLEAR> FX-LCLR)
after procedure."

Good luck...

fragol

[zoraldinho]

If you have service manual check under error codes.