Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11
    Service Manager 10,000+ Posts
    Error codes 00025-0004

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Error codes 00025-0004

    Quote Originally Posted by Gbr View Post
    Hello

    I' have a similar problem on IPC1 + .. The code is e00025- 0403 and it alternates(when switching ON/OFF) with code e00009 -0001
    If anybody has any suggestions how to fix it, or where to begin ?
    I changed decurler unit (becouse e009) and no result.

    Best regards
    ================================================== ===

    E025-0004

    If You have just lifted and then lowered the Hopper Assy to pull out the process unit but never installed the grey upper cover shown below either because you are running tests or just forgot to reinstall it. Now you receive the E025-0004.

    This is because the Hopper Shutter Lever (the grey handle shown in the picture below) was not pushed back in.

    NOTE: This is an example with the grey upper cover removed because if the hopper shutter lever is not pushed in, the grey upper cover will not sit in its place.


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  2. #12
    Technician
    Join Date
    Sep 2012
    Posts
    25
    Rep Power
    0

    Re: Error codes 00025-0004

    Quote Originally Posted by teckat View Post
    ================================================== ===

    E025-0004

    If You have just lifted and then lowered the Hopper Assy to pull out the process unit but never installed the grey upper cover shown below either because you are running tests or just forgot to reinstall it. Now you receive the E025-0004.

    This is because the Hopper Shutter Lever (the grey handle shown in the picture below) was not pushed back in.

    NOTE: This is an example with the grey upper cover removed because if the hopper shutter lever is not pushed in, the grey upper cover will not sit in its place.


    Thanks you!

  3. #13
    Technician
    Join Date
    Sep 2012
    Posts
    25
    Rep Power
    0

    Re: Error codes 00025-0004

    Had another way for this err ? Many times for my machine... Please help!

  4. #14
    Service Manager 10,000+ Posts
    Error codes 00025-0004

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Error codes 00025-0004

    Quote Originally Posted by mrban View Post
    Had another way for this err ? Many times for my machine... Please help!
    -----------------------------

    do u have the same SUB CODE again E025-0004 ???

    or different sub codes xxxx

    Check for a cut-wire of hopper sensor cable that connects the hopper shutter switch (SW15) and the host machine--
    E025-0004 can be displayed when toner is supplied with the hopper shutter closed.

    1, In service mode > COPIER > I/O > DC-CON, check the display of Bit 11 of address No.P001.
    When "0" is displayed, go through the following procedures.
    - "0": Shutter is closed/ "1": Shutter is open.
    2, Open the front cover, take out the process unit cover and check that the shutter lever [1] of hopper unit is installed all the way.

    3, Enter the shutdown sequence to turn OFF the power and remove the hopper right cover.
    4, Disconnect the connector J440 of hopper sensor cable and check that there is continuity between 16-pin and 17-pin.

    5, If there is no continuity confirmed in step 4, SW15 [2] may be faulty, shutter switch cable [3] or hopper sensor cable [4] may be cut.
    Check the continuity of each part and replace the part that does not have continuity.











    1-Check the connection of the Shutter Sensor.

    2-Replace the Shutter Sensor,Shutter Switch Cable, or Hopper Sensor Cable. or ALL

    - SW15 [2]:
    Continuity when the switch actuator is turned ON
    - Shutter switch cable [3]:
    Continuity between J447 1-pin and J449 1-pin
    Continuity between J447 2-pin and J449 2-pin
    - Hopper sensor cable [4]:
    (C1)
    Continuity between J440L 16-pin and J447D 2-pin
    Continuity between J440L 17-pin and J447D 1-pin
    (C1+)
    Continuity between J440GL 16-pin and J447GD 2-pin
    Continuity between J440GL 17-pin and J447GD 1-pin
    ================================================== =====================
    Hopper sensor cable is integrated with HP sensor cable of each color supply screw.
    WC4-5262 = Micro-switch(SW15)
    FM2-7331 = CABLE, SHUTTER SWITCH
    FM2-7235 = CABLE, HOPPER SENSOR(C1)
    FM2-7741 = CABLE, HOPPER SENSOR(C1+)
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #15
    Technician
    Join Date
    Sep 2012
    Posts
    25
    Rep Power
    0

    Re: Error codes 00025-0004

    Thanks you! My printer had SUB CODE again E025-0004, i will check and report again.

  6. #16
    Suvenirufabrika.lv
    Guest

    imagepress c1 error code e000747-051c

    Help! imagepress c1 error code e000747-051c

  7. #17
    teacher-guide-expert-guru 2,500+ Posts
    Error codes 00025-0004

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: imagepress c1 error code e000747-051c

    Quote Originally Posted by Suvenirufabrika.lv View Post
    Help! imagepress c1 error code e000747-051c

    First pull out all sub pcb from main controller and clean contacts.






    Next time suggest new thread.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  8. #18
    Service Manager 10,000+ Posts
    Error codes 00025-0004

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: imagepress c1 error code e000747-051c

    Quote Originally Posted by Suvenirufabrika.lv View Post
    Help! imagepress c1 error code e000747-051c

    Measures for Error Codes Caused by Poor Contact between Sub PCBs and Main Controller PCB

    When poor contact develops between one of the Sub PCBs [1] and the Main Controller PCB [2] , various
    kinds of error codes or malfunction to the machine may occur.

    When one of the possible error codes is displayed, perform the procedure outlined below.
    Required Tools:
    • Philips Screwdriver (standard size).
    • Ruler
    • Alcohol
    • Lint-free Paper


    ------------------------------------------------------------------------------------------------------------------------------------------------------
    Pcb's.location.jpg

    Removing Pcb's. Page 1.jpg
    Removing Pcb's. Page 2.jpg
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #19
    Suvenirufabrika.lv
    Guest

    Re: Error codes 00025-0004

    canon imagepress c1 error code e000061-0001

  10. #20
    Service Manager 10,000+ Posts
    Error codes 00025-0004

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Error codes 00025-0004

    Quote Originally Posted by Suvenirufabrika.lv View Post
    canon imagepress c1 error code e000061-0001

    Check to make sure there is no foreign matter on the Primary Corona Assembly.
    In one case, a piece of the old corona wire was stuck in the unit causing arcing. Also make sure that the wire is properly sitting on the little wire blocks on each end of the unit.


    A missing drum shaft knob screw can cause the E061 0001.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here