IR-2535 (E000)

[zero2004]

Hi every one

an error code appear suddenly on canon ir-2535 copier (E000), can you tell me the problem with this error, and how can overcome it and the way to reset the error.

Thanks for your cooperation

[teckat]

Hi every one

an error code appear suddenly on canon ir-2535 copier (E000), can you tell me the problem with this error, and how can overcome it and the way to reset the error.

Thanks for your cooperation

imageRUNNER 2525 / 2530 / 2535 / 2545
How to clear E000, E001, E002 and E003.

1-Enter service mode by pressing additional functions than 2 than 8 and then Additional Functions.
#SSSW will be displayed.

2-Use the right arrow and scroll to #CLEAR then press OK.

3-Use the right arrow and scroll to ENGINE then press OK.
ERRCLR will be displayed then press OK.

4-Then power cycle the machine.

-----------------------------------------------------------------------------------------------------

Service Mode : ADDITIONAL FUNCTIONS>2 KEY>8 KEY> ADDITIONAL FUNCTIONS>#CLEAR>ENGINE>ERRCLR.

Note: This mode should be used to clear all Fixing related Error Codes.



If this does not resolve the error code. / u need to call for service or if u are a tech--pull out the fix unit to inspect

[zero2004]

imageRUNNER 2525 / 2530 / 2535 / 2545
How to clear E000, E001, E002 and E003.

1-Enter service mode by pressing additional functions than 2 than 8 and then Additional Functions.
#SSSW will be displayed.

2-Use the right arrow and scroll to #CLEAR then press OK.

3-Use the right arrow and scroll to ENGINE then press OK.
ERRCLR will be displayed then press OK.

4-Then power cycle the machine.

-----------------------------------------------------------------------------------------------------

Service Mode : ADDITIONAL FUNCTIONS>2 KEY>8 KEY> ADDITIONAL FUNCTIONS>#CLEAR>ENGINE>ERRCLR.

Note: This mode should be used to clear all Fixing related Error Codes.



If this does not resolve the error code. / u need to call for service or if u are a tech--pull out the fix unit to inspect

First of all, thanks for your assistance, can you tell me the cause of this error, and which unit i must inspect

[teckat]

best to get a manual to understand your product

this is usually an issue with the Fixing Film Unit

E000 0001 = Fixing temperature abnormal rise
Description =The temperature detected by the main thermistor does not rise to the specified value during startup control.
Remedy =
1.Go through the following to clear the error: CLEAR >
ENGIN > ERRCLR; and then turn OFF and then ON the
power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).

see pdf.
Film Unit.pdf

click on pic> better view
film unit (Large).JPG

[zero2004]

best to get a manual to understand your product

this is usually an issue with the Fixing Film Unit

E000 0001 = Fixing temperature abnormal rise
Description =The temperature detected by the main thermistor does not rise to the specified value during startup control.
Remedy =
1.Go through the following to clear the error: CLEAR >
ENGIN > ERRCLR; and then turn OFF and then ON the
power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).

see pdf.
Film Unit.pdf

click on pic> better view
film unit (Large).JPG

thank you very much

[Rachid.Akli]

First of all, thanks for your assistance, can you tell me the cause of this error, and which unit i must inspect

Hi to all,

If clearing the error code fixes the issue, it could be explained by the fact that when the power source drops to less than 10% of its nominal value (220V in our region), the fixing temperature will take more time to reach the required value. This could result in E000 error code. If the error couldn't be cleared, start by replacing the fixing film resistance assembly. and don't forget to clear the error again as explained above.

Rachid

[zero2004]

Thanks for all help

Where can I buy Fixing Assembly and how much it cost

[canonbundy]

Thanks for all help

Where can I buy Fixing Assembly and how much it cost

Where are you Located? Judging by your questions I assume you are not a Canon Tech, as far as I am aware there are no 'after market' consumable/parts available for this model therefore you will need to contact your local Canon Dealer.

[teckat]

FM4-3363-000

1

FIXING ASSEMBLY

iR2545/2535 Series 120V [DP]

FM3-9302-000

1

FIXING ASSEMBLY

iR2545/2535 Series 230V [DP]

FM4-3364-000

1

FIXING FILM ASSEMBLY

120V H1,H2,TH1,TH2,TH3

FM3-9303-000

1

FIXING FILM ASSEMBLY

230V H1,H2,TH1,TH2,TH3

FC9-8974-000

1

ROLLER, PRESSURE

iR2545/2535/2530/2525/2520 Series

[zoraldinho]

Check system version!

System WLaa-63-01

Modification of E000 error that occurs in a low temperature environment upon the completion of print job.