Hi every one
an error code appear suddenly on canon ir-2535 copier (E000), can you tell me the problem with this error, and how can overcome it and the way to reset the error.
Thanks for your cooperation
Hi every one
an error code appear suddenly on canon ir-2535 copier (E000), can you tell me the problem with this error, and how can overcome it and the way to reset the error.
Thanks for your cooperation
imageRUNNER 2525 / 2530 / 2535 / 2545
How to clear E000, E001, E002 and E003.
1-Enter service mode by pressing additional functions than 2 than 8 and then Additional Functions.
#SSSW will be displayed.
2-Use the right arrow and scroll to #CLEAR then press OK.
3-Use the right arrow and scroll to ENGINE then press OK.
ERRCLR will be displayed then press OK.
4-Then power cycle the machine.
-----------------------------------------------------------------------------------------------------
Service Mode : ADDITIONAL FUNCTIONS>2 KEY>8 KEY> ADDITIONAL FUNCTIONS>#CLEAR>ENGINE>ERRCLR.
Note: This mode should be used to clear all Fixing related Error Codes.
If this does not resolve the error code. / u need to call for service or if u are a tech--pull out the fix unit to inspect
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
best to get a manual to understand your product
this is usually an issue with the Fixing Film Unit
E000 0001 = Fixing temperature abnormal rise
Description =The temperature detected by the main thermistor does not rise to the specified value during startup control.
Remedy =
1.Go through the following to clear the error: CLEAR >
ENGIN > ERRCLR; and then turn OFF and then ON the
power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
see pdf.
Film Unit.pdf
click on pic> better view
film unit (Large).JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Hi to all,
If clearing the error code fixes the issue, it could be explained by the fact that when the power source drops to less than 10% of its nominal value (220V in our region), the fixing temperature will take more time to reach the required value. This could result in E000 error code. If the error couldn't be cleared, start by replacing the fixing film resistance assembly. and don't forget to clear the error again as explained above.
Rachid
"Find a job you love and you’ll never have to work a day in your life." Nagy's father
Thanks for all help
Where can I buy Fixing Assembly and how much it cost
FM4-3363-000 1 FIXING ASSEMBLY iR2545/2535 Series 120V
[DP]
FM3-9302-000 1 FIXING ASSEMBLY iR2545/2535 Series 230V
[DP]
FM4-3364-000 1 FIXING FILM ASSEMBLY 120V
H1,H2,TH1,TH2,TH3
FM3-9303-000 1 FIXING FILM ASSEMBLY 230V
H1,H2,TH1,TH2,TH3
FC9-8974-000 1 ROLLER, PRESSURE
iR2545/2535/2530/2525/2520 Series
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Check system version!
System WLaa-63-01
Modification of E000 error that occurs in a low temperature environment upon the completion of print job.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Bookmarks