Page 4 of 4 FirstFirst 1234
Results 31 to 38 of 38
  1. #31
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: Canon DR9050c Scanner

    Glad to help. Yeah....that one is not in the book...lol

  2. #32
    Trusted Tech 50+ Posts
    Join Date
    Mar 2015
    Location
    Harare
    Posts
    89
    Rep Power
    19

    Re: Canon DR9050c Scanner

    Hi there,I'm having a problem with the Capture Perfect software v3.1.35...As soon as you send a command to scan, the tray lifts all the way up but the paper doesn't go through at all. The software just says not responding and then after a while it displays "Unknown error"Anyone had this problem?Ben

  3. #33
    Field Supervisor 500+ Posts roho's Avatar
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    844
    Rep Power
    43

    Re: Canon DR9050c Scanner

    Quote Originally Posted by m91 View Post
    anyone have any jamming problems with this model??????
    Yes, quite a bit! Check for staples of course, but if you have over 3 million and the new roller kit jams, try what Canuck suggested earlier. I did one in the fielld, and one returned to the shop, success both times.







    car servicing
    Yes, quite a bit! Check for staples of course, but if you have over 3 million and the new roller kit jams, try what Canuck suggested earlier. I did one in the fielld, and one returned to the shop, success both times.

  4. #34
    Service Manager 5,000+ Posts
    Canon DR9050c Scanner

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Canon DR9050c Scanner

    Hi All,

    I know this is an old thread but my colleague has a DR9050C with an intermittent jamming issue. The feed kit has been replaced but the issue remains.

    We have never worked or even seen this old scanner model before, so would anyone be kind enough to share the parts & service manual if possible please.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #35
    Service Manager 10,000+ Posts
    Canon DR9050c Scanner

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon DR9050c Scanner

    Quote Originally Posted by copier tech View Post
    Hi All,

    I know this is an old thread but my colleague has a DR9050C with an intermittent jamming issue. The feed kit has been replaced but the issue remains.

    We have never worked or even seen this old scanner model before, so would anyone be kind enough to share the parts & service manual if possible please.
    https://www.manua.ls/canon/imageform...50c/manual?p=1
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #36
    Service Manager 10,000+ Posts
    Canon DR9050c Scanner

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon DR9050c Scanner

    [QUOTE=copier tech;2459275]Hi All,

    I know this is an old thread but my colleague has a DR9050C with an intermittent jamming issue. The feed kit has been replaced but the issue remains.
    [B]
    We have never worked or even seen this old scanner model before, so would anyone be kind enough to share the parts & service manual.

    Canon DR-9050C User Manual - Page 1 of 154 | Manualsbrain.com


    Has service and parts.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #37
    Service Manager 5,000+ Posts
    Canon DR9050c Scanner

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Canon DR9050c Scanner

    Quote Originally Posted by teckat View Post
    https://www.manua.ls/canon/imageformula-dr-9050c/manual?p=1

    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #38
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: Canon DR9050c Scanner

    Quote Originally Posted by acsolutions View Post
    Hello, replaced the separation motor, but did not respond! I took a better look and found the upper guide plate was slightly bent causing it to bind on the registration roller, only when clam shell was closed. I removed the guide and it was not noisy during rotation and when feeding. It took me awhile to get it in proper form, then customer ran a few thousand sheets and it sounded good. if problem reoccurs will replace guide, it also looked like u turn guide may have also been effected. My guess is that someone shut the clam shell with an obstruction, causing the deformation. One thing I dont understand is when removing the separation roller there was no noise or jamming, just multiple feeding, this totally threw me in the wrong direction. Separation drive is totally separate from registration, transport and delivery sections. Thanks for the input guys
    [QUOTE=teckat;2459306]
    Quote Originally Posted by copier tech View Post
    Hi All,

    I know this is an old thread but my colleague has a DR9050C with an intermittent jamming issue. The feed kit has been replaced but the issue remains.
    [B]
    We have never worked or even seen this old scanner model before, so would anyone be kind enough to share the parts & service manual.

    Canon DR-9050C User Manual - Page 1 of 154 | Manualsbrain.com


    Has service and parts.
    One thing that I can add is that on all these DR scanners, X10C,etc..they all have gears with one-way roller clutches inside of them in the pickup/feed roll drive section...look in the parts manual. I lube them with a thin turbine oil(3 in 1 will work)...a drop or 2 while its running with sensors cheated, top cover off(simple). If it "rattles" while it's feeding, the oneway is slipping and lubing it will free up the needle rollers inside it, allowing it to grab the shaft correctly for drive...it will quieten right up when you hit the right one...lol. I've done this on practically every model of DRs over the years. Old Canon document feeders were notorious for sticky oneways/scored shafts. Hope this helps

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here