Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: clc 4000 e194

  1. #1
    bkivett
    Guest

    clc 4000 e194

    i only have 2nd half of manual,

    i turn off auto image reg, look at test print 6, cyan is skew front to back
    i can do manual image reg and move image, but not sure on skew yet.

    there are motors 2 and 3 that deal with image skew and focus i think.
    wondering if these two motors can be seen working?

    with my other colors in registration, i dont feel like itb assy has problem, any thoughts?

    bgk

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Dec 2007
    Posts
    474
    Rep Power
    40

    194

    I don't know color, but here is info i found for e194 sub code 0002, reg off. and other subs
    1. Check the shutter on the pattern read assembly, it might be bent.
    2. also there is a frame screw(black) that backs off until it contacts the transfer drive pulley and slows it down
    also:3. Install a Transfer Area Kit (F02-5403-010).
    hope it helps

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here