ir2270 gives zigzag in a copy

[teckat]

i've changed the laser unit but it's the same thing. i still need you.

Blurred, Fuzzy

glass copies & network prints
= same exact issue = a process of inspection> & elimination

1-paper path/transportation area
2-Registration- ground leaf spring position contact to roller
-cut the wire ties for the registration sensor
3-charging>development
4-path before fusing
5-during fusing-replace M3 Fixing motor

[AIT MAMEUR]

hello, i'm sorry, but my problem still. i know that is mechanical problem but i have changed pratically all parts without result. it appears in the same place and sometimes no. it is always happenning in the second side.
i'm really need you.

[intracopy2]

Good evening I think for self blame humidity or the lower roller of oven(press roller)

[teckat]

hello, i'm sorry, but my problem still. i know that is mechanical problem but i have changed pratically all parts without result. it appears in the same place and sometimes no. it is always happenning in the second side.
i'm really need you.

--------------------------------------------------

1st side OK !
2nd side is issue
-------------------------------------------------------
First>>>>>>
In service mode Level 1

Copier > Adjust > Feed Adj > LOOP-MF > change it to +30
LOOP-MF= Adjusting the registration loop amount at cassette paper feed
default is 45

also at
Copier > Adjust > Feed Adj > LOOPREFE > change it to + 55
default is 45
LOOPREFE=Use it to adjust the degree of arching for the 2nd side of double-sided prints.




Change the value set for the service mode.
1. Press * >then 2 and 8 at the same time, and then press * >then press *2 to enter Level 2 in service mode.
Select COPIER> OPTION> BODY> FIX-SMR and change the value to "+2".
2. now go back > Enter Level 1 in service mode,
select COPIER> ADJUST> DEVELOP> DE-OFST, and change the
value to "-10" or "-20

[zaza]

hello, i'm sorry, but my problem still. i know that is mechanical problem but i have changed pratically all parts without result. it appears in the same place and sometimes no. it is always happenning in the second side. i'm really need you.

salem friend Ait ..l am tech zaza from Algeria ..l can solve your problems ..to meet you in your workshop's ..if you need invited me by my phone number or contacted me by my skype ...we live in same countries ..are you agreed ...??

[hugohug]

When the paper comes out with Z-Fold / Accordion / 3 Fold and jams after several copies with error 0108 Delay in PS14, it means that the fuser film is not rolling with the pressure roller.

Replace fixing film, Remove the old grease (IMPORTANT), Apply Grease and replace film.

[teckat]

When the paper comes out with Z-Fold / Accordion / 3 Fold and jams after several copies with error 0108 Delay in PS14, it means that the fuser film is not rolling with the pressure roller.

Replace fixing film, Remove the old grease (IMPORTANT), Apply Grease and replace film.

u reply to a 2013 reply to post

[aco.bk]

images.jpg