ir2270 gives zigzag in a copy

[AIT MAMEUR]

hello, i have canon ir2270 which has this problem showing in this image. some one to help me. thank you.

[zoraldinho]

It's sounds like the grounding spring for the steel registration roller not have a contact with the roller.Post a pic. please.

[AIT MAMEUR]

i don't know at which level i can find this roller. please help.

[SCREWTAPE]

hello, i have canon ir2270 which has this problem showing in this image. some one to help me. thank you.

Upload an image if you can.

[zaza]

i don't know at which level i can find this roller. please help.

my Algerian technician friend ...explain clear your problems ..her not meaning zigzag ....making some pictures to knowing your problems

[teckat]

hello, i have canon ir2270 which has this problem showing in this image. some one to help me. thank you.

is it a paper fold issue=

or a copy quality issue >like a wrinkles or creases=
wrinkles or creases.JPG

[zaza]

this pictures mean it have bad press roller in fusion section ...if that ..you should be changing by other .

[AIT MAMEUR]

image1.jpg
hello, ok, here is my problem. thank you.

[blazebusiness]

i don't know at which level i can find this roller. please help.

Here's the pic you requested of that reg roller spring reg ground spring.jpg It's most likely a fuser issue though. Something to check....Is this problem happening when you make a copy from the glass or only when you use the Doc Feeder.

[teckat]

image1.jpg
hello, ok, here is my problem. thank you.

are u a tech