Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    macr30
    Guest

    Canon MF8180C - Canon Service Support Tool

    Message on LCD display "DOWNLOAD CONNECTED" I have the firmware file "mf8180_wlaa04-02.zip".
    I need the Canon SST to flash the software, will someone please share file, info on how to......

    Thanks....

  2. #2
    Service Manager 5,000+ Posts
    Canon MF8180C - Canon Service Support Tool


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: Canon MF8180C - Canon Service Support Tool

    I have it but it isn't free. If interested, email me at Paul@justmanuals.com


  3. #3
    Service Manager 10,000+ Posts
    Canon MF8180C - Canon Service Support Tool

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon MF8180C - Canon Service Support Tool

    Quote Originally Posted by macr30 View Post
    Message on LCD display "DOWNLOAD CONNECTED" I have the firmware file "mf8180_wlaa04-02.zip".
    I need the Canon SST to flash the software, will someone please share file, info on how to......

    Thanks....
    =========
    where did u get this firmware from ??
    never seen firmware listed on this model ??


    MAY WORK
    Uninstall the printer and disconnect the USB cable from the back of the printer. Then restart the computer and turn the printer on. Then once the computer has booted back up to the desktop, plug the USB cable back in and let Windows detect the printer. Then it should install the drivers for the printer.

    Then click on Start-------Settings--------Printers and Faxes----------Right-click on your printer icon and make sure the printer is set as default. Then scroll down to Properties and open the properties up. Click the Ports tab and make sure the USB virtual printer port is checked and the printer is listed beside it. Then click General tab and click Print a Test Page to see if the printer will print a test page
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    macr30
    Guest

    Re: Canon MF8180C - Canon Service Support Tool

    Thank you for your reply.
    I have uninstalled and re-install the driver, the PC detects and installs theusb devices but the printer never boots up.
    I unplug the printer from the power and usb.
    I wait a few minutes and plug the power plug without the usb.
    As soon as the LCD lights up the message "DOWNLOAD STANBY" shows upand never goes away.
    And then when I plug the USB cable to the printer and PC the message change,"DOWNLOAD CONNECTED" and it never goes away.......
    and i found that firmware here.


  5. #5
    Service Manager 250+ Posts
    Join Date
    Mar 2009
    Location
    London, UK
    Posts
    335
    Rep Power
    0

    Re: Canon MF8180C - Canon Service Support Tool

    Yes you need the Canon SST tool, i'll send it to you

  6. #6
    macr30
    Guest

    Re: Canon MF8180C - Canon Service Support Tool

    Thank you, just let me know what i have to do.
    I understand this is a 50-50 chance it will work, but, if i have to change the logic board or main board,
    can anybody tell me which circuit board it is? It's the one in the right panel or the one on the lid wich it has the USB and the ethernet plug in.

  7. #7
    macr30
    Guest

    Re: Canon MF8180C - Canon Service Support Tool

    Well thank you all in this forum for your help, especially canon.tech, after a few trials and error
    I was able to register the boot image and the program image and flashed to the printer, b
    oot it back up and this work horse is back to work. Still have not figure out how it happens but….
    it’s working now.

    Again Thank you ALL……

  8. #8
    Service Manager 10,000+ Posts
    Canon MF8180C - Canon Service Support Tool

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon MF8180C - Canon Service Support Tool

    Quote Originally Posted by macr30 View Post
    Well thank you all in this forum for your help, especially canon.tech, after a few trials and error
    I was able to register the boot image and the program image and flashed to the printer, b
    oot it back up and this work horse is back to work. Still have not figure out how it happens but….
    it’s working now.

    Again Thank you ALL……

    Poor grounding at outletfor printer

    VOLTAGE SPIKES=Fast, short duration electrical transients

    Lightning strikes
    Power outages
    Tripped circuit breakers
    Short circuits
    Power transitions in other large equipment on the same power line
    Malfunctions caused by the power company
    Electromagnetic pulses (EMP) with electromagnetic energy distributed typically up to the 100 kHz and 1 MHz frequency range.
    Inductive spikes
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    macr30
    Guest

    Re: Canon MF8180C - Canon Service Support Tool

    Oh......I see...
    Will have to install a better power contitioner then....
    thanks...

  10. #10
    Junior Member C K's Avatar
    Join Date
    Sep 2018
    Posts
    5
    Rep Power
    0

    Re: Canon MF8180C - Canon Service Support Tool

    Hello,
    I have the same problem with my MF8180C it's possible to get "Step by step" instructions how to flash this device? I get the firmware mf8180_wlaa04-02 and Canon SST tool CSS SSTv 474Em_Setup but I don't know is this the right one and have no manual for this to see how to proceed.

    Thanks in advance!

    DSC_0002_2.jpgDSC_0010_2.jpg

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here