Thanks: 0
Likes: 0
Dislikes: 0
Originally Posted by C K
first try a factory reset
service mode
Press Press [MENU]; then, press [#] to start service mode.
Data Initialization Mode (CLEAR)
# CLEAR
Registration/settings of user data and service data are initialized with CLEAR ALL, and go back to factory defaults.
# Clear All
Since the TYPE setting of #CLEAR item goes back to STANDARD when #CLEAR ALL is executed, there is a need to change the TYPE setting to
conform to the communications standards of a specific country/region.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Must I press [MENU] + [#] and then power on MF8180C?
I tried this when is powered on and nothing.
DSC_0002_3.jpg
No ,
Try & Enter while printer is powering up
https://www.google.com/url?sa=t&sour...abFkFR2X4KbhKh
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Hello teckat!
Thank you for "Service Manual MF8100", it's nice to have this.
I appreciate to helping my to bring Canon back in life. I need for some printing and more scanning, this is all for home use and after all this years still have original cartridge, last year put only new black cartridge, can say it's new device.
I will try you advice to "Factory Reset".
If I understand you correctly ... after power on when LCD shows "Download Standby" I press [MENU] + [#] + [OK] Enter?
Hello,
I have try with factory reset but nothing.
Than I have connected laptop with USB cable, the Canon servis told my that I need only firmware, no Canon SST tool needed, only to connect to laptop, what I have done and than start to instal two driwers, but one failed Canon CFYSA, no idea what that is but doesn't work.
Can someone help me with this problem?
DSC_0002_2.jpg
01_Canon.jpg02_Canon.jpg03_Canon.jpg04_Canon.jpg05_Canon.jpgDSC_0007.JPG
Posting Permissions
Reply With Quote
Bookmarks