Sorry, wrong model on video ----disregard
-----------------------------------------------------------------
In service mode
COPIER>OPTION>BODY
MODEL-SZ
Use it to select the mode of indication by destination and of the
ADF original
size detection.
Settings
0: AB (6R5E),
1: INCH (5R4E),
2: A (3R3E),
3: AB/INCH (6R5E)
COPIER>OPTION>BODY>SCANSLCT
Use it to enable or disable the original size detection mechanism for the
ADF.
• When enabled, the scan size is determined in relation to the original
size.
Settings
0: off (default),
1: on
COPIER>OPTION>USER
MF-LG-ST
Use it to indicate the Extra Length key for paper up to 630 mm long (multifeeder, free; the
ADF will also accommodate paper up to 630 mm
long).
Settings:
0: normal mode (default),
1: extra length mode (key indicated)
================================================== ======
is this how your control panel screen shows
Attachment 40527
In service mode
COPIER>OPTION>ACC
DK-P
Use it to select a paper size for use in the paper deck.
Caution After making a selection, be sure to turn off and then on the main power
switch.
Settings 0: A4 (default), 1: B5, 2: LTR, 3: A-LTR
Have you done this cassette adjustments ??????????
Attachment 40523
Attachment 40524
Attachment 40525
Attachment 40526
Bookmarks