Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts Jamesu's Avatar
    Join Date
    Mar 2012
    Location
    Walsall.
    Posts
    101
    Post Thanks / Like
    Rep Power
    7

    Finisher T1 jam code 1001

    Has anyone ever come across this?

    machine jams on the outlet bit with half in the finisher. Doesn't reach sensor and is a delay jam

    leaned all rollers and checked all sensors with no luck, customer is miles away too!

    Thanks for help

    Have you tried turning it off and on? No...Oh, it works now!

  2. #2
    Field Supervisor 5,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    12,232
    Post Thanks / Like
    Rep Power
    156

    Re: Finisher T1 jam code 1001

    Quote Originally Posted by Jamesu View Post
    Has anyone ever come across this?

    machine jams on the outlet bit with half in the finisher. Doesn't reach sensor and is a delay jam

    leaned all rollers and checked all sensors with no luck, customer is miles away too!

    Thanks for help
    ================
    check and make sure PI103 changes state in I/O mode. PI103 can be checked in SERVICE MODE>COPIER>I/O>SORTER>P009>bit 0; make sure it changes state. If it changes state, check the actuator for responsiveness, if it seems sluggish, add a spring wrap. Also check the mylar that would cover PI103 from above, it has been known to move in a way to interfere with PI103's actuation. Check the foam pad that PI103 actuator rests on, in one odd case, the foam pad was missing causing this same situation where the finisher would only jam when multiple sets were made. The image below is for reference purposes, it depicts PI103's actuator and the mylar located above it.



    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here