Canon i-Sensys MF9130

[diizzy]

Hi,

I have a machine that seems to hang during sleep mode after a few days, it's not that much of a deal since it'll work fine after a power cycle but it is a bit annoying nonetheless. While the machine is a bit old by now I guess perhaps a firmware upgrade could possibly help this situation but I can't seem to find any firmwares available at all for this machine.

The firmware itself is dated 2008 and controller version is WLaa-13-02 so perhaps this is the latest version already?

Best regads,
Daniel

[Iommanxman]

I have had this exact problem on a couple of these machines. The solution in the end was to replace the main controller PCB. Not cheap....or just return to Canon is the other option.

[diizzy]

Many thanks for the reply even though it was somewhat bad news...
Sorry for the late reply

Best regards
Daniel

[bipc]

Hi, would this be what you are looking for?
MF9100 series - Bootable WLaa23-02/ Lang23-02/ Boot ROM WLaa23.01 release of 2010.10.29, see the attachment and if it is PM me and i can get you the firmware for you to try ok

mf9100-010.pdf

[diizzy]

Upgrading the firmware did the trick in my case, no more hangs during stand by.
I've been running the newest available firmware for about 2 weeks without any issues so I guess its safe to say that it fixed my issue.
Huge thanks to bipc for helping out :-)

Best regards,
Daniel

[falah taan]

Hi, would this be what you are looking for?
MF9100 series - Bootable WLaa23-02/ Lang23-02/ Boot ROM WLaa23.01 release of 2010.10.29, see the attachment and if it is PM me and i can get you the firmware for you to try ok

mf9100-010.pdf

hlo please i am very need to firmware of mf9130 please can you send it to me (fa64lah@yahoo.com )I can buy it and thanks to you

[falah taan]

hlo please i am very need to firmware of mf9130 please can you send it to me (fa64lah@yahoo.com )I can buy it and thanks to you

Thank you very much for your helping. if it s possible can you send firmware link to my mail (fa64lah@yahoo.com) or any way you like.becous i cant know you Sheard folder thank a lot to you.