Call a tech. That's what we do.
Thanks: 0
Likes: 0
Dislikes: 0
Call a tech. That's what we do.
Originally Posted by Brian8506
"HAVE TECH WILL TRAVEL"
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
When you swing that blue lever down, the developer unit should slide to the right and when you swing the lever to where it is shown in the picture, it should slide left. I have seen them where the dev unit is not quite in right and you can move that lever all day and the unit doesn't move into contact with the drum unit. It looks ok from the picture, but something to check.
Check the metal tab on the back of the drum unit and also the contact spring in the back wall of the machine where the drum goes. If the charge roller isn't getting any power, I believe you get blanks as well and I have seen issues with the spring and the metal tab before.
As someone else mentioned, check the door interlocks (there is more than one).
Posting Permissions
Reply With Quote
Bookmarks