Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    101
    Rep Power
    11

    c3220 maual need ,,unhook spring

    here is my c3220 pics , open the fuser door ,one the left top side there is a connecting rod with a spring -
    i can see the spring unhook
    someone can give me the picture to see that sping ?
    thanks


  2. #2
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    101
    Rep Power
    11

    Re: c3220 maual need ,,unhook spring

    this is the picture

    Attached Images Attached Images

  3. #3
    Service Manager 10,000+ Posts
    c3220 maual need ,,unhook spring

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Lightbulb Re: c3220 maual need ,,unhook spring

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



  4. #4
    Service Manager 10,000+ Posts
    c3220 maual need ,,unhook spring

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: c3220 maual need ,,unhook spring

    Quote Originally Posted by pc123321 View Post
    this is the picture
    pull out your
    MULTI FEED ASSEMBLY


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Technician
    Join Date
    May 2009
    Location
    London
    Posts
    25
    Rep Power
    0

    Re: c3220 maual need ,,unhook spring

    A teckat said, slide out the MP tray found on the right of the machine and this will give you access to the part of the machine you have shown. I can see that you have removed a screw and dropped it into the machine. What are you trying to do? What problem do you have? Explain a bit more so that we can assist.


  6. #6
    Service Manager 10,000+ Posts
    c3220 maual need ,,unhook spring

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: c3220 maual need ,,unhook spring

    MFT.JPG

    Press the release button on the machine’s right side to slide out the manual feed unit .

    Remove the screw [1] and the stopper plate [2]; then, detach the manual feed unit [3].


    Attached Images Attached Images
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    101
    Rep Power
    11

    Re: c3220 maual need ,,unhook spring

    Quote Originally Posted by redzventures View Post
    A teckat said, slide out the MP tray found on the right of the machine and this will give you access to the part of the machine you have shown. I can see that you have removed a screw and dropped it into the machine. What are you trying to do? What problem do you have? Explain a bit more so that we can assist.
    as you mention a screw inside ,these i found ,that screw i did not know when it drop
    the reason i found the spring unhook is my magenta drum leak
    and i print out test pg 6 and pg 10 if you enlarge the pg 6 you will see a light magenta
    i already clean and check itb belt -before-- i follow tekcat took out big metal plate and ground to metal finger
    tomorrow i will took all the feed out to see ---
    is that spring hook somewhere that cause cleaning blade not clean the itb belt ?
    took out magenta drum there is a mengenta toner a line on side of itb belt


  8. #8
    Service Manager 10,000+ Posts
    c3220 maual need ,,unhook spring

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: c3220 maual need ,,unhook spring

    Quote Originally Posted by pc123321 View Post
    as you mention a screw inside ,these i found ,that screw i did not know when it drop
    the reason i found the spring unhook is my magenta drum leak
    and i print out test pg 6 and pg 10 if you enlarge the pg 6 you will see a light magenta
    i already clean and check itb belt -before-- i follow tekcat took out big metal plate and ground to metal finger
    tomorrow i will took all the feed out to see ---
    is that spring hook somewhere that cause cleaning blade not clean the itb belt ?
    Took out magenta drum there is a mengenta toner a line on side of itb belt
    =========================================
    has nothing to do with MAGENTA/
    STREAK on ITB SHEET_ remove ITB SHEET & AND CHECK the Magenta Primary Chg Roller position --- make sure the plastic bushing holders F/R for it are not damaged or missing their small springs>especially the one on side of M line on ITB ( If M Roller is not held down >it will sit to high and push up ITB Sheet into M Drum)
    ITB PRIMARY ROLLS.JPG



    inside pic is===multi paper feed mount assembly
    MULTI PAPER FEED MOUNT ASSEMBLY.JPG

    mf.JPG

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    101
    Rep Power
    11

    Re: c3220 maual need ,,unhook spring

    Quote Originally Posted by teckat View Post
    =========================================
    has nothing to do with MAGENTA/
    STREAK on ITB SHEET_ remove ITB SHEET & AND CHECK the Magenta Primary Chg Roller position --- make sure the plastic bushing holders F/R for it are not damaged or missing their small springs>especially the one on side of M line on ITB ( If M Roller is not held down >it will sit to high and push up ITB Sheet into M Drum)
    ITB PRIMARY ROLLS.JPG



    inside pic is===multi paper feed mount assembly
    MULTI PAPER FEED MOUNT ASSEMBLY.JPG

    mf.JPG

    two picture the yellow circle
    one file spring --from paper feed view
    springback --from fuser side view

    Attached Images Attached Images

  10. #10
    Service Manager 10,000+ Posts
    c3220 maual need ,,unhook spring

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: c3220 maual need ,,unhook spring

    believe it rests on the plate / why

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here