c3220 maual need ,,unhook spring

[pc123321]

here is my c3220 pics , open the fuser door ,one the left top side there is a connecting rod with a spring -
i can see the spring unhook
someone can give me the picture to see that sping ?
thanks

[pc123321]

this is the picture

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[teckat]

this is the picture

pull out your
MULTI FEED ASSEMBLY

[redzventures]

A teckat said, slide out the MP tray found on the right of the machine and this will give you access to the part of the machine you have shown. I can see that you have removed a screw and dropped it into the machine. What are you trying to do? What problem do you have? Explain a bit more so that we can assist.

[teckat]

MFT.JPG

Press the release button on the machine’s right side to slide out the manual feed unit .

Remove the screw [1] and the stopper plate [2]; then, detach the manual feed unit [3].

[pc123321]

A teckat said, slide out the MP tray found on the right of the machine and this will give you access to the part of the machine you have shown. I can see that you have removed a screw and dropped it into the machine. What are you trying to do? What problem do you have? Explain a bit more so that we can assist.

as you mention a screw inside ,these i found ,that screw i did not know when it drop
the reason i found the spring unhook is my magenta drum leak
and i print out test pg 6 and pg 10 if you enlarge the pg 6 you will see a light magenta
i already clean and check itb belt -before-- i follow tekcat took out big metal plate and ground to metal finger
tomorrow i will took all the feed out to see ---
is that spring hook somewhere that cause cleaning blade not clean the itb belt ?
took out magenta drum there is a mengenta toner a line on side of itb belt

[teckat]

as you mention a screw inside ,these i found ,that screw i did not know when it drop
the reason i found the spring unhook is my magenta drum leak
and i print out test pg 6 and pg 10 if you enlarge the pg 6 you will see a light magenta
i already clean and check itb belt -before-- i follow tekcat took out big metal plate and ground to metal finger
tomorrow i will took all the feed out to see ---
is that spring hook somewhere that cause cleaning blade not clean the itb belt ?
Took out magenta drum there is a mengenta toner a line on side of itb belt

=========================================
has nothing to do with MAGENTA/
STREAK on ITB SHEET_ remove ITB SHEET & AND CHECK the Magenta Primary Chg Roller position --- make sure the plastic bushing holders F/R for it are not damaged or missing their small springs>especially the one on side of M line on ITB ( If M Roller is not held down >it will sit to high and push up ITB Sheet into M Drum)
ITB PRIMARY ROLLS.JPG



inside pic is===multi paper feed mount assembly
MULTI PAPER FEED MOUNT ASSEMBLY.JPG

mf.JPG

[pc123321]

=========================================
has nothing to do with MAGENTA/
STREAK on ITB SHEET_ remove ITB SHEET & AND CHECK the Magenta Primary Chg Roller position --- make sure the plastic bushing holders F/R for it are not damaged or missing their small springs>especially the one on side of M line on ITB ( If M Roller is not held down >it will sit to high and push up ITB Sheet into M Drum)
ITB PRIMARY ROLLS.JPG



inside pic is===multi paper feed mount assembly
MULTI PAPER FEED MOUNT ASSEMBLY.JPG

mf.JPG

two picture the yellow circle
one file spring --from paper feed view
springback --from fuser side view

[teckat]

believe it rests on the plate / why