Canon ir 3300, 803 Error code.

[polo]

No, im not a electronic technician, Im Metalurgical Engineer and i worked in this area for 17 years. Two years ago,i run a samall copicenter. The caps i checked with the ohmmeter looking for continuity or short circuit. If ok then injected only 6 volts dc , and y checked the volts when discharged them. All components that i checked were removed from de board, checked them and welding again. Thanks a lot.

[polo]

---------------

Lightning strike causes internal damage >

in US we don't have the time to trace down resistors or caps , there is no complete circuit diagrams any more for printers

see pdf----Attachment 21296




see link
Aliexpress.com : Buy SMA Z1001 switching regulators for printer copier power from Reliable SMA-Z1001 suppliers on ZHENNANDE electronic matching supermarket




E803 MPWS power supply voltage error
(low voltage error)

replace power supply

Canon FH3-2615 IR 3300 Switching Regulator Power Supply PCB Asy

Many available to choose from on eBay/ cheap

http://compare.ebay.com/like/200907039935?var=lv&ltyp=AllFixedPriceItemTypes&va r=sbar

Hi, Thanks for your help. The diagram is of the dc controller. It had the 300 connector. The main power supply (FH3-2613-00, damaged) had the 204 connector. Thanks.

[teckat]

No, im not a electronic technician, Im Metalurgical Engineer and i worked in this area for 17 years. Two years ago,i run a samall copicenter. The caps i checked with the ohmmeter looking for continuity or short circuit. If ok then injected only 6 volts dc , and y checked the volts when discharged them. All components that i checked were removed from de board, checked them and welding again. Thanks a lot.

--------

hope u used silver solder

[polo]

No, im not a electronic technician, Im Metalurgical Engineer and i worked in this area for 17 years. Two years ago,i run a samall copicenter. The caps i checked with the ohmmeter looking for continuity or short circuit. If ok then injected only 6 volts dc , and y checked the volts when discharged them. All components that i checked were removed from de board, checked them and welding again. Thanks a lot.

Yesterday i traveled 320 km to buy the main power supply, it was raining hard but i did return with the pcb. Today installed it, and turn on the ir 3300 and all its ok. I paid 280 usdll. Now i have time to get the regulator (sma-z1001) to fix the another pcb and i will sell it.
Thanks a lot for yours comments.

[teckat]

ole.jpg

[DAG COPIERS & COMPUTERS]

Yesterday i traveled 320 km to buy the main power supply, it was raining hard but i did return with the pcb. Today installed it, and turn on the ir 3300 and all its ok. I paid 280 usdll. Now i have time to get the regulator (sma-z1001) to fix the another pcb and i will sell it.
Thanks a lot for yours comments.

Thanks for the feedback; we're glad you are up n rolling.

[teckat]

Yesterday i traveled 320 km to buy the main power supply, it was raining hard but i did return with the pcb. Today installed it, and turn on the ir 3300 and all its ok. I paid 280 usdll. Now i have time to get the regulator (sma-z1001) to fix the another pcb and i will sell it.
Thanks a lot for yours comments.

---------


was that 280.00 us money ??


did u search e-bay first ??

[polo]

ole.jpg

Thank you !