Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Field Supervisor 500+ Posts tcypy1961's Avatar
    Join Date
    Feb 2009
    Location
    Pensacola, FL
    Posts
    771
    Rep Power
    38

    Canon IC D1120 2nd request

    I noticed that I mis-spelled a word and wonder if that is why I've not received a reply. The adf on this copier is pulling the original in and as it exits it stops. I'm thinking a dirty or faulty sensor; if this is the cause could somebody tell me where it is located and how to get to it and a part # please.
    Thanks!!!

  2. #2
    Adeptus Mechanicus Magos 500+ Posts
    Canon IC D1120 2nd request

    mjarbar's Avatar
    Join Date
    Aug 2008
    Location
    West Thurrock, Essex
    Posts
    726
    Rep Power
    44

    Re: Canon IC D1120 2nd request

    Hello,

    I am going from the iR1133 series which in most cases is the same as your machine, the document end sensor is # WG8-5696-000 (PS702)

    PS702.jpg

    I have marked the sensor with a red arrow, it can be removed by taking off the cover shown above. I would also make sure the rollers are free from any dust etc. and if required the part for the flag that activates the sensor is FC7-6321-000 which sits on the open/close cover of the doc feed.

    Hope it helps.
    The impossible is easy - miracles take a little longer
    So let us not talk falsely now, the hour is getting late.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here