Please give me part number of humidity sensor in ir 3300 and ir 3035.
Where is it placed in the machine.
Please give me part number of humidity sensor in ir 3300 and ir 3035.
Where is it placed in the machine.
-----------------------------------------------------------------------------------
u mean the Environment Sensor (humidity)
The temperature of the room must be between 7.5° and 30°C (59° and 86°F) and humidity,
between 5% and 80%.
iR3300 Series
in service mode>>>>>>>>>>COPIER>OPTION>BODY
>HUM-SW
Use it to enable or disable the environment sensor.
Settings
0: auto control by environment sensor
1: fixed mode (for high humidity)
2: fixed mode (for normal humidity)
3: fixed mode (for low humidity)
(In 1, 2, or 3, the move of control does not depend on the environment
sensor.)
Environment Sensor.JPG
SCREWED ON DEVELOPING FAN ASSEMBLY FM1
FH7-7559-000
S3.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
====================
for iR3035 SERIES
Operating environment (humidity range) 25% to 75%
Environment Sensor
it is HU1
Environment Sensor H1.JPG
FK2-0160-000
machine front plate location
HUM-SW Changing the charge output setting by humidity sensor
LEVEL 2 ---IN SERVICE MODE---
COPIER > OPTION > BODY>HUM-SW
<Setting range>
0: Automatic control by humidity sensor [Default]
1 to 5: Fixed environment and deemed control corresponding to the
parameters of charging, development, and transfer
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks