Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 1,000+ Posts kuby's Avatar
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    1,269
    Rep Power
    54

    C5185 - scan glass message

    Is there a way to turn off the message to clean the scan glass? I have set the two indicators to "0" but the message still comes on.

  2. #2
    Service Manager 10,000+ Posts
    C5185 - scan glass message

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: C5185 - scan glass message

    Quote Originally Posted by kuby View Post
    Is there a way to turn off the message to clean the scan glass? I have set the two indicators to "0" but the message still comes on.
    ------------------------
    under Additional Functions
    >User Modes
    >COMMON SETTINGS>look for >(Display the Cleaning of the Document Reading or READ AREA CLEANING) depending on model set this to " OFF"

    ------;>

    Stream Reading Dust Detection Control
    The machine checks the stream reading glass and the ADF platen roller for the presence/absent of dust.
    It then changes the point of reading or executes image correction depending on the result of detection, thereby avoiding reproduction of dust particles in its output images. The machine executes the detection mechanism only when the ADF is used:

    if changed >>>>>>>>>>>>>>>>>>>
    U need to put back the P Print settings for
    COPIER>OPTION>BODY>
    DFDST-L1
    A higher setting will increase the level of dust detection (i.e., the machine will be more sensitive in detecting dust, which if left
    behind will cause thin lines in the images).
    settings range
    0 to 255
    [Factory default/After RAM clear: 200]

    DFDST-L2
    A higher setting will increase the level of dust detection (i.e., the machine will be more sensitive in detecting dust, which if left
    behind will cause thin lines in the images).
    settings range
    0 to 255
    [Factory default/After RAM clear: 200]

    do not leave these settings at "0"
    --------------------

    Last edited by teckat; 07-16-2013 at 05:13 AM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: C5185 - scan glass message

    I set them at 50. Do all of the ccd adjustments for platen copying and document feeder. Run STRD-POS to find a nice place on glass to read from. Clean the white plate under the glass(for shading correction).

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here