[Error Code] E000007-0000

[anand8620]

Hi

I am frequently getting this error code E000007-0000. I switched off the copier for sometime and restarting. This process is for several times. Any body is there to help me to overcome this problem. If so please guide me.

regards
ANAND
0091 950 5502793
E-mail: anand8620@gmail.com

[Luther]

Re: E000007-0000

well 1st im assuming its a canon, what model? it is the fixing film , either its torn or the little white patch on the end of the film is dirty or the sensor is dirty, depending on the model

[Andyboachie]

Re: E000007-0000

Hi

I am frequently getting this error code E000007-0000. I switched off the copier for sometime and restarting. This process is for several times. Any body is there to help me to overcome this problem. If so please guide me.

regards
ANAND
0091 950 5502793
E-mail: anand8620@gmail.com

You did not indicate the model of your machine. But I am sure it is any of the ImageRunner models. If that is the case consider the following.
E000007 have to deal with anything about the fixing film and the fixing unit. Carefully observe from the fixing unit to see if the film have displaced. It will be ideal to change the film completely. In correcting this ensure that the white rectangular area at the right hand side of the fixing film faces the sensor properly. If it does not, you may though have changed the film, the E000007 will still show. Try this before you consider any other option.