When swapping an internal finisher to an old machine what do i need to do once everything is physically installed?
Any help is appreciated.
Thanks: 0
Likes: 0
Dislikes: 0
When swapping an internal finisher to an old machine what do i need to do once everything is physically installed?
Any help is appreciated.
========================Originally Posted by johnm@ucopier.com
=
Nothing
make sure u have done the install procedure in pdf.
Finisher Z1 Instsll.pdf
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Good holiday, sorry vacation teckat?
Air Temperature = too hot
Water = too cold
Beer = just right
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Sounds ideal, where did you go, England my home!?
East Coast > USA
next year > overseas possible
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
i'd love to visit the USA, especially new york, if you ever visit The UK look me up!
----------------
Thanks for invite> love Fish & Chips made the right way
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
ha ha ha that made me crack up! my folks have fish 'n chips every Saturday night without fail!
Friday night is fish night.
Canon Tech-don't know which part of our green and pleasant land you're in but if you're down near Camden Market in London go to Poppies Fish n Chip shop. It's done up like an old 1940's shop and has everything including an air raid half way through the evening. Foods great.
A little off track for a Z1 issue so sorry!
Mark
Reply With Quote
Bookmarks