DADF-N1 Missing piece to sep pads - ff6-1291-000

[akewldewd]

We ordered a bunch of new sep pad holders and non of them have the white piece which, is on the back side where the spring sits in place. Its a two step holder so you can turn it around to increase spring tension. (I assume that is what it is for)

We looked in the parts manual and don't see a listing for it seperately from the pad holder so, we assume it would come with the holder Part# ff6-1291-000 and ff6-1292. I can upload a picture.

Can anyone tell me how to get this piece? Does it have its own part number? If so, what is that part number? We need these ASAP.

Its the white piece in the image I uploaded.

FF6-1291-000.jpg

[HP:guy]

FC5-4367-000

[akewldewd]

FC5-4367-000

Thank you!

[Canuck]

Remove it from the old one and snap it in

[Dan Dryer]

FF6-1291 is for DADF-H1 and doesn't use a spring adjuster.

The Sep Pad for DADF-N1 is FL2-0963-010.

[akewldewd]

Remove it from the old one and snap it in

We will have to start doing that. But in the mean time we have several machines in the warehouse we stole this part off of and need to replace them. But thanks anyway.

[creatinchaos]

FC5-4367-000 Spring Pad Mount. Double checked part number. Figure P33 item # 59.

[Dan Dryer]

FC5-4367-000 Spring Pad Mount. Double checked part number. Figure P33 item # 59.

We've already established that, but you still can't fit them to FF6-1291 because it's the wrong Sep Pad.

The OP's basic problem is that he's ordered a bunch of the wrong Sep Pads.

[Canuck]

Yeah 1291 is for 3300 df.

[akewldewd]

FC5-4367-000 Spring Pad Mount. Double checked part number. Figure P33 item # 59.

Yes we ordered a bunch of them and it is ecactly what we needed.

Thanks!