Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    103
    Rep Power
    24

    transfer belt c3220 or something else cleaning blade

    any advice are welcome
    thanks
    Attached Images Attached Images

  2. #2
    Trusted Tech 50+ Posts Rick Martinez's Avatar
    Join Date
    Sep 2009
    Location
    San Carlos, CA
    Posts
    77
    Rep Power
    30

    Re: transfer belt c3220 or something else cleaning blade

    have you check the drum unit for droping toner? also check the transfer belt unit. and last check the fuser unit.

  3. #3
    Service Manager 250+ Posts HP:guy's Avatar
    Join Date
    Feb 2013
    Location
    World Wide Web
    Posts
    280
    Rep Power
    27

    Re: transfer belt c3220 or something else cleaning blade

    Where are you at in the PM cycle?

  4. #4
    Service Manager 10,000+ Posts
    transfer belt c3220 or something else  cleaning blade

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: transfer belt c3220 or something else cleaning blade

    Quote Originally Posted by pc123321 View Post
    any advice are welcome
    thanks
    -----------------------------------
    remove all drums>toners>fuser unit(keep duplex part slid out) remove ITB> remove cleaning blade assbly> take a flashlight look inside toward cleaning unit rail> get a vacuum (unplug printer first) and vacuum out all that waste toner on rail> & wipe down the Mylar sheet


    Keep the ITB UNIT out
    remove the metal plates> see undersides> bet they are dirty
    throw the large plate in the garbage

    now put back the small plate<> make sure to screw(1) in varistor(2) > then attach other varistor end under leaf spring ( see pic)

    varistor need to be grounded under leaf spring (no where to screw in) or u will receive a random error code

    ITB_Varistor.jpg
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    103
    Rep Power
    24

    Re: transfer belt c3220 or something else cleaning blade

    Quote Originally Posted by teckat View Post
    -----------------------------------
    remove all drums>toners>fuser unit(keep duplex part slid out) remove ITB> remove cleaning blade assbly> take a flashlight look inside toward cleaning unit rail> get a vacuum (unplug printer first) and vacuum out all that waste toner on rail> & wipe down the Mylar sheet


    Keep the ITB UNIT out
    remove the metal plates> see undersides> bet they are dirty
    throw the large plate in the garbage

    now put back the small plate<> make sure to screw(1) in varistor(2) > then attach other varistor end under leaf spring ( see pic)

    varistor need to be grounded under leaf spring (no where to screw in) or u will receive a random error code

    ITB_Varistor.jpg
    this drum is oem drum ----
    why ?
    Attached Images Attached Images

  6. #6
    Senior Tech 100+ Posts SAZ911's Avatar
    Join Date
    Mar 2013
    Location
    GABORONE
    Posts
    193
    Rep Power
    26

    Re: transfer belt c3220 or something else cleaning blade

    Hi,

    how many copies has that magenta drum done, by the looks of the copies posted that drum is way past its life........time for a clean and service then replace the drum.
    SAZ911..........

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    103
    Rep Power
    24

    Re: transfer belt c3220 or something else cleaning blade

    Quote Originally Posted by SAZ911 View Post
    Hi,

    how many copies has that magenta drum done, by the looks of the copies posted that drum is way past its life........time for a clean and service then replace the drum.
    yellow : 50
    magenta : 56
    cyan : 50
    black: 57
    what wrong with me

  8. #8
    Service Manager 10,000+ Posts
    transfer belt c3220 or something else  cleaning blade

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: transfer belt c3220 or something else cleaning blade

    Quote Originally Posted by pc123321 View Post
    yellow : 50
    magenta : 56
    cyan : 50
    black: 57
    what wrong with me
    -----------------------------

    DRUM % READINGS USUALLY MEAN NOTHING

    have seen hundreds of defective DRUMS & or TONER cartridges for this model



    just clean the printer> throw away M Drum

    replace with all new drums> & new M Toner cartridge > then run your AUTO GRADATION ( every other day )



    it's not Rocket Science !!!
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Service Manager 250+ Posts
    Join Date
    Mar 2009
    Location
    London, UK
    Posts
    335
    Rep Power
    0

    Re: transfer belt c3220 or something else cleaning blade

    The picture of the magenta drum you posted is not from the C3220!?

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Dec 2012
    Location
    flushing new york
    Posts
    103
    Rep Power
    24

    Re: transfer belt c3220 or something else cleaning blade

    Quote Originally Posted by Canon.Tech View Post
    The picture of the magenta drum you posted is not from the C3220!?
    one reason is very clear ----
    all,this drum is not made by me ---that is for sure
    i did not know where it made from ---
    from ebay ------i did not want to mention more
    i bought cyan and yellow from internet ,they got drums from tonermax---
    before that cyan and yellow bought from ebay , when i open there is no tearing strip , that means two drums are used and sealed again to auction
    the magenta drum is also bought from ebay ,it looks like new , all new packing , all my drums came from ebay (hp drum hp 8560...)before , this one is oem drum but it didn't like oem ----it's compatible or premium ,,,sounds strange
    i bought one black from new york loyal computer ---canon dealer the sales respresentative said you drive 75miles round trip to got black drum

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here