Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Jul 2013
    Posts
    27
    Rep Power
    9

    Exclamation IR 1600 pickup problem in bypass

    In IR 1600 when the paper feed from bypass try the paper just pick up and stop near to drum and the paper jam.I check the manual clause bypass pickup sensor but the problem not solve.Can any body fix the problem ?


  2. #2
    Service Manager 10,000+ Posts
    IR 1600 pickup problem in bypass

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,150
    Rep Power
    213

    Re: IR 1600 pickup problem in bypass

    Quote Originally Posted by Guna View Post
    In IR 1600 when the paper feed from bypass try the paper just pick up and stop near to drum and the paper jam.I check the manual clause bypass pickup sensor but the problem not solve.Can any body fix the problem ?
    jam code ----------- error code

    all paper sizes

    jam from bypass only ?
    is this issue from PC Printing or glass copying ?? or both

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Jul 2013
    Posts
    27
    Rep Power
    9

    Re: IR 1600 pickup problem in bypass

    Nothing any error code only paper jam indicate.
    All size paper jam only when paper feed from bypass .And it is happen both from glass scaning and also computer prints.
    Pickup from all trays is ok.
    Regards
    Guna


  4. #4
    Service Manager 10,000+ Posts
    IR 1600 pickup problem in bypass

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,150
    Rep Power
    213

    Re: IR 1600 pickup problem in bypass

    Quote Originally Posted by Guna View Post
    Nothing any error code only paper jam indicate.
    All size paper jam only when paper feed from bypass .And it is happen both from glass scaning and also computer prints.
    Pickup from all trays is ok.
    Regards
    Guna
    =================
    1-Does the holding plate move up in keeping with pickup timing?
    2-Is there damage/foreign matter on the gear of the pickup roller
    drive assembly?
    3-Does the multifeeder pickup solenoid operating normally?
    4-Is the manual feed separation pad worn?



    PS105 multifeeder paper sensor did u check it ????????????????? (lower right)
    photo interrupters may be checked using ‘SENSOR’ under ‘TEST MODE’ in service
    mode (6-3: SENSOR).

    did u check the #10 REPORT= Jam/Error Log Report
    Indication : JAM/ERR LOG REPORT
    Type : jam, error, alarm history

    or Alarm History

    040017=multifeeder retry alarm


    How many jam indicators are lit on control panel



    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here