Thanks:
0
Likes:
0
Dislikes:
0
-
-
Re: iR-ADV C5051 Series / iR-ADV C5255 Series--E009-0000 Error Codes
Run into this on 5030/5045 series also. When the fixing motor reverses to release the pressure between the lfr and film assembly,the plate doesnt hold the cam sufficiently and it turns and clicks. I clean off all the grease,slightly reform the plate and usually goes away. Bulletin good to know too. I've changed fixing drive assemblies on many 5030s for jamming issues. Canon has bulletin out on it
-
Re: iR-ADV C5051 Series / iR-ADV C5255 Series--E009-0000 Error Codes
Run into this on 5030/5045 series also. When the fixing motor reverses to release the pressure between the lfr and film assembly,the plate doesnt hold the cam sufficiently and it turns and clicks. I clean off all the grease,slightly reform the plate and usually goes away. Bulletin good to know too. I've changed fixing drive assemblies on many 5030s for jamming issues. Canon has bulletin out on it
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks