Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    NetTech10305
    Guest

    IR3035 ADF Scanning for Duplex when not selected

    Hey guys, thanks for reading. I have a Canon IR3035 that when scanning through the ADF will scan as if it's going to do double sided prints even though it is not selected. It doesn't actually print the both sides it just scans. When I select duplex it does just one extra pass through the ADF and will print double sided. It takes a lot longer to copy multiple documents through the ADF because of this. Any and all help is greatly appreciated. Thanks!

  2. #2
    East Coast Imaging 2,500+ Posts
    IR3035 ADF Scanning for Duplex when not selected

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69

    Re: IR3035 ADF Scanning for Duplex when not selected

    Did you try initializing your copy settings in additional functions.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  3. #3
    East Coast Imaging 2,500+ Posts
    IR3035 ADF Scanning for Duplex when not selected

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69

    Re: IR3035 ADF Scanning for Duplex when not selected

    Are you a tech?


    For the hell of check these settings in service mode.

    Check the setting under COPIER>OPTION>BODY>LEVEL 2>SCANSLCT. (*28* *2 COPIER>OPTION>BODY>SCANSLCT.) There are two settings available.
    0: OFF (Determining the scan area by document detection)
    1: ON (Determining scan area by paper size)
    If the setting is "1" the feeder will scan the original twice. Set to "0" for single scanning.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  4. #4
    NetTech10305
    Guest

    Re: IR3035 ADF Scanning for Duplex when not selected

    Yes im a tech. Not as knowledgeable as I would like to be but I try. I have a initialized all copy settings and it still did it. I will check those settings in service mode when I go back. Hopefully that's it but I don't know how it could have been changed. Thank you for your reply. Any other tips would be helpful so I can be prepared when I go back. Thanks

  5. #5
    East Coast Imaging 2,500+ Posts
    IR3035 ADF Scanning for Duplex when not selected

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69

    Re: IR3035 ADF Scanning for Duplex when not selected

    Quote Originally Posted by NetTech10305 View Post
    Yes im a tech. Not as knowledgeable as I would like to be but I try. I have a initialized all copy settings and it still did it. I will check those settings in service mode when I go back. Hopefully that's it but I don't know how it could have been changed. Thank you for your reply. Any other tips would be helpful so I can be prepared when I go back. Thanks
    If I find anymore info on it I will pass it on.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  6. #6
    Service Manager 1,000+ Posts
    IR3035 ADF Scanning for Duplex when not selected

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,586
    Rep Power
    62

    Re: IR3035 ADF Scanning for Duplex when not selected

    This procedure will fix it. I've had it before.
    Quote Originally Posted by SCREWTAPE View Post
    Are you a tech?


    For the hell of check these settings in service mode.

    Check the setting under COPIER>OPTION>BODY>LEVEL 2>SCANSLCT. (*28* *2 COPIER>OPTION>BODY>SCANSLCT.) There are two settings available.
    0: OFF (Determining the scan area by document detection)
    1: ON (Determining scan area by paper size)
    If the setting is "1" the feeder will scan the original twice. Set to "0" for single scanning.

  7. #7
    NetTech10305
    Guest

    Re: IR3035 ADF Scanning for Duplex when not selected

    Thanks for your help screwtape. That was the issue exactly

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here