Envelopes are sealing. How can I turn down the temp.? Even #10 settings.
Thanks, Jeff
Envelopes are sealing. How can I turn down the temp.? Even #10 settings.
Thanks, Jeff
-----------------------------------------
Set the service mode as follows:
COPIER>OPTION>BODY>ENV-SPD from 0 to 1; this runs the envelope at plain paper speed when the envelope setting is selected.
0=half speed
1-normal speed
This service mode setting was introduced with System Software v65.01.
The following are the recommended envelopes for use in the imageRUNNER:
COM10: Mailwell No. 582
Monarch: Mailwell No. 553
DL: Mailwell/Schneidersöne No. 11345
Yougata 4: Uzumaki Y-401
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks