Thanks:
0
Likes:
0
Dislikes:
0
-
Re: CANON IRC3220
Originally Posted by
sniper2g8
The JAM CODE is 0207
--------;
0207 =Jam Code: Fixing delivery stationary jam
Inspect / Replace the internal delivery roller with a new one (FB6-4862-000).
roller.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Re: CANON IRC3220
Originally Posted by
sniper2g8
The JAM CODE is 0207
--------;
0207 =Jam Code: Fixing delivery stationary jam
Inspect / Replace the internal delivery roller with a new one (FB6-4862-000).
This roller becomes very soft overtime from internal heat/ test & squeeze > because on visual looking it will appear ok !
Because roller is soft- it will delay and not push/drive paper out past fuser rollers
Removing the Internal Delivery Roller
1) Slide out the fixing feeder unit.
2) Open the fixing feeder unit cover.
3) Remove the E-ring and the bushing [2]at the front; then, remove the gear [3]and the bushing [4] at the rear.
INTERNAL DEL ROLL.JPG
INTERNAL DEL ROLL2.JPG
4) Free the internal delivery roller [1] from the cut-off of the frame at the front; then, detach it.
roller.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks