Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Sep 2012
    Posts
    5
    Rep Power
    0

    Angry SYSTEM ERROR E007

    MY COPIER REPORTS SYSTEM ERROR AND AS SUCH CAN NOT PRINT.
    I HAVE TURN OFF & OFF TO NO AVAIL, IT KEEPS TELLING ME SYS ERROR.
    SOME TIMES WHEN I TURN IT ON OFF OR LEAVE IT FOR THE NEXT DAY,
    IT MAY PRINT BUT AFTER THAT, IT REPORTS THE SAME MESSAGE.

    WHAT CAN i DO TECH?
    CANON C-IR2016


  2. #2
    Service Manager 1,000+ Posts
    SYSTEM ERROR E007

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,081
    Rep Power
    37

    Re: SYSTEM ERROR E007

    Fuser film torn. Replace upper fuser assembly or entire fuser


  3. #3
    Service Manager 10,000+ Posts
    SYSTEM ERROR E007

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,206
    Rep Power
    215

    Re: SYSTEM ERROR E007

    Quote Originally Posted by Alphonse View Post
    MY COPIER REPORTS SYSTEM ERROR AND AS SUCH CAN NOT PRINT.
    I HAVE TURN OFF & OFF TO NO AVAIL, IT KEEPS TELLING ME SYS ERROR.
    SOME TIMES WHEN I TURN IT ON OFF OR LEAVE IT FOR THE NEXT DAY,
    IT MAY PRINT BUT AFTER THAT, IT REPORTS THE SAME MESSAGE.

    WHAT CAN i DO TECH?
    CANON C-IR2016
    ---------------------------------------------

    if u are a tech/ remove FUSER UNIT to inspect

    if damaged replace as noted by Brian8506

    don't forget to clear ERROR in service mode
    make sure green jam release lever is installed with the new unit.




    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Technician MWALA's Avatar
    Join Date
    Sep 2011
    Posts
    29
    Rep Power
    13

    Re: SYSTEM ERROR E007

    Fuser Film error,
    If fuser film is intact, clean the white patch on the film usually it gets dirty and wont be read by the sensor


  5. #5
    Junior Member
    Join Date
    Sep 2012
    Posts
    5
    Rep Power
    0

    Re: SYSTEM ERROR E007

    Quote Originally Posted by teckat View Post
    ---------------------------------------------

    if u are a tech/ remove FUSER UNIT to inspect

    if damaged replace as noted by Brian8506

    don't forget to clear ERROR in service mode
    make sure green jam release lever is installed with the new unit.


    hi tech done all that still to no avail
    still say system error
    and the display screen shows partly the message.
    so can copy the error code, it ends with 7.

    please help


  6. #6
    Service Manager 1,000+ Posts
    SYSTEM ERROR E007

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,081
    Rep Power
    37

    Re: SYSTEM ERROR E007

    You replaced the fuser but still NG? If you can't see half the display, you need to replace it so you can see the whole error code


  7. #7
    Senior Tech 500+ Posts kuby's Avatar
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    697
    Rep Power
    27

    Re: SYSTEM ERROR E007

    Replace the fuser, if the film is intact then the film is not rotating at the proper speed when machine is running.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here