Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    canon ir3300 error

    dear all
    i have the canon ir3300 at my client and as he told me its suddenly gave error e220-0001 ,so i said it lamp or the inverter for it , so i change the lamp and tried same error occur ,also i changed the PCB and also make clear same error is there;s anything must do for this problem ?
    Distinguished road makes you jewel in rough

  2. #2
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: canon ir3300 error

    Does the lamp come on? You say you replaced lamp and lamp regulator...new lamp regulator? When you get a replacement lamp for these machines you have to get the new lamp regulator also...

  3. #3
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: canon ir3300 error

    Read this....
    Attached Files Attached Files

  4. #4
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: canon ir3300 error

    thank you for your support ,yea the lamp is blinking when i turn the machine on .
    Distinguished road makes you jewel in rough

  5. #5
    Service Manager 10,000+ Posts
    canon ir3300 error

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: canon ir3300 error

    Quote Originally Posted by mramlawi View Post
    dear all
    i have the canon ir3300 at my client and as he told me its suddenly gave error e220-0001 ,so i said it lamp or the inverter for it , so i change the lamp and tried same error occur ,also i changed the PCB and also make clear same error is there;s anything must do for this problem ?
    -----------------------------------------------------------------------------------------------------------------
    E220-0001
    Check and verify the 24V supply to the Reader Controller from the Main Power Supply (Switching Regulator) is present.

    It is possible that one of the loads on the DC-Controller can take down the 24 volts.
    Remove the 24volt loads off the DC-Controller and connect the connectors one by one to locate the short or defective load.


    Unplug the copier and remove the Copyboard glass. Move the scanner manually and check to see if the Scanner Home Position Sensor Flag is coming into contact with the Inverter Pcb, or any of the wiring. Contact with the flag may be causing a short during Scanner movement when copying from the glass.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: canon ir3300 error

    Quote Originally Posted by teckat View Post
    -----------------------------------------------------------------------------------------------------------------
    E220-0001
    Check and verify the 24V supply to the Reader Controller from the Main Power Supply (Switching Regulator) is present.

    It is possible that one of the loads on the DC-Controller can take down the 24 volts.
    Remove the 24volt loads off the DC-Controller and connect the connectors one by one to locate the short or defective load.


    Unplug the copier and remove the Copyboard glass. Move the scanner manually and check to see if the Scanner Home Position Sensor Flag is coming into contact with the Inverter Pcb, or any of the wiring. Contact with the flag may be causing a short during Scanner movement when copying from the glass.
    hello ,
    i checked the sensor falg and everything okay
    thanks
    Distinguished road makes you jewel in rough

  7. #7
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: canon ir3300 error

    The pcb on the new regulator is brown on one side and green on the other. Is this your situation..... New lamp,pcb brown on one side?

  8. #8
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: canon ir3300 error

    thanks for all my problem is solved i changed the Power supply Board
    Distinguished road makes you jewel in rough

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here