Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    cham
    Guest

    Canon IR 2020 E808 error

    Hi

    My canon ir2020 show message E808 error after starting.
    How to fix this error?

  2. #2
    Service Manager 10,000+ Posts
    Canon IR 2020 E808 error

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR 2020 E808 error

    Quote Originally Posted by cham View Post
    Hi

    My canon ir2020 show message E808 error after starting.
    How to fix this error?
    =================;

    imageRUNNER ADVANCE C2020 / C2030 / C2225 / C2230
    E808-0002 Error Code

    Error : E808-0002 error


    Connector J120 on the power supply PCB was not seated correctly. It was found that a tie wrap on the harness by connector J111 was too tight and was pulling on the wires going to J120. Cutting the tie wrap resolved the intermittent error code.



    E808-0001 = Title Zero cross signal detection error
    Detection description=
    Unable to detect 43 to 57Hz for 5000 msec or longer at the start of zero cross detection
    Remedy=Electrical trouble with failed zero cross signal
    1. Check failure between the AC Driver PCB (UN14/ J122) and the DC Controller PCB (UN09/ J10). (trapped cable, open circuit, connector disconnection) -> Replace the part in the case of trapped cable/open circuit
    2. Replace the AC Driver PCB (UN14)
    3. Replace the DC Controller PCB (UN09)
    4. Check the power supply condition at the customer site.
    When it is below 43 to 57Hz, ask for a construction work.

    E808-0002 = Title Zero cross signal detection error
    Detection description=
    Unable to detect 43 to 57Hz for 500 msec or longer after confirmation of a zero cross cycle
    Remedy=Electrical trouble with failed zero cross signal
    1. Check failure between the AC Driver PCB (UN14/ J122) and the DC Controller PCB (UN09/ J10). (trapped cable,open circuit, connector disconnection) -> Replace the part in the case of trapped cable/open circuit
    2. Replace the AC Driver PCB (UN14)
    3. Replace the DC Controller PCB (UN09)
    4. Check the power supply condition at the customer site.
    When it is below 43 to 57Hz, ask for a construction work.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician copyprint's Avatar
    Join Date
    Oct 2012
    Posts
    18
    Rep Power
    24

    Cool Re: Canon IR 2020 E808 error

    Quote Originally Posted by cham View Post
    Hi

    My canon ir2020 show message E808 error after starting.
    How to fix this error?
    as for ir2020 the error code E808-0000 is a fuser film, fuser drive motor, power supply or dc controller board hope to help

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here