Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Posts
    117
    Rep Power
    30

    ir7095 v2 finisher

    hi all..have a problem on v2 finisher..all functions work fine apart from staple...throws up jam code 1f25...im going down the route of finisher controller pcb as cant find any mechanicle fault...any thoughts?...many thanks

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: ir7095 v2 finisher

    Quote Originally Posted by steve schofield View Post
    hi all..have a problem on v2 finisher..all functions work fine apart from staple...throws up jam code 1f25...im going down the route of finisher controller pcb as cant find any mechanicle fault...any thoughts?...many thanks
    The Code refers to a timing error between sheets to the exit tray ie. 1 sheet slower than the next, if there is a Punch Unit clean all rollers to the tray, make sure the collected staples are clear, clean the Shute with alcohol and check for breakage of the Paddle Sensor Flag (FC6-6149-000) in Tray B.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Posts
    117
    Rep Power
    30

    Re: ir7095 v2 finisher

    thanks for post...finisher is pushing out 1st 2 sheets then 3 rd sheet throws code only on staple

  4. #4
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Posts
    117
    Rep Power
    30

    Thumbs up Re: ir7095 v2 finisher

    turned out to be lose staple assembly...screws had come lose.....

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: ir7095 v2 finisher

    Quote Originally Posted by steve schofield View Post
    turned out to be lose staple assembly...screws had come lose.....
    Onya Mate, 9 times outta 10 it's mechanical, cheaper than trying to re-sell a Finisher PCB .
    Last edited by canonbundy; 09-28-2013 at 09:31 AM. Reason: typo

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here