Error Code shows E000261

[Guna]

Hello Everybody,
While I install the machine IR2520,Error code shows 000261.I think it is issue of voltage frequencee,I check the voltage supply & it is ok. Is it power supply PCB issue .Any body Fix the problem ?
Regards Guna.

[teckat]

Hello Everybody,
While I install the machine IR2520,Error code shows 000261.I think it is issue of voltage frequencee,I check the voltage supply & it is ok. Is it power supply PCB issue .Any body Fix the problem ?
Regards Guna.

------------------

/look again & post correct code

[Guna]

Problem solve by replace power supply PCB.
Regards Guna

[HELIO240]

Hi, this error code E0261-0000 refer a fault communication PCB DC CONTROLLER , change this PCB for another .

[teckat]

Hi, this error code E0261-0000 refer a fault communication PCB DC CONTROLLER , change this PCB for another .

___--___
Issue fixed:
See above

[rafaelperez6]

Hola a todos,
mientras instalo la máquina IR2520, el código de error muestra 000261. Creo que es un problema de frecuencia de voltaje, verifico el suministro de voltaje y está bien. ¿Es un problema de PCB de la fuente de alimentación? ¿Algún organismo solucionó el problema?
Saludos Guna.

I had this problem in a Canon 4551 and I solved it on the power card, there was a burnt capacitor due to a bad connection in the fuser. name of the capacitor on the FU3 card in the FM1-N906

[teckat]

I had this problem in a Canon 4551 and I solved it on the power card, there was a burnt capacitor due to a bad connection in the fuser. name of the capacitor on the FU3 card in the FM1-N906

great find