iPF6300/6350/6300S/8300/8300S
Error Codes 2618/2F44/2F48/2F49/2F50/2F51/2F52 (REVISED)
DETAILS:
Workflow procedure to resolve the error codes mentioned above:
NOTE: Remove and discard old print heads. DO NOT install new print heads at this time.
1. For the iPF8300 series, replace the carriage relay PCB for the above mentioned error codes.
If the iPF8300 is displaying a “can’t detect paper size” message, then the entire carriage assembly should be replaced.
2. For the iPF6300 series, replace the Main Controller PCB.
Service reminder: Boot printer up in Service Mode when replacing the Main Controller and follow board replacement steps (CPU). Then boot printer in Service Mode again to clear error. Simply entering Service Mode will automatically clear the error code.
3. * Boot printer in Download Mode and upgrade Firmware to the latest version.
4. Boot printer up normally and only put new PH’s in when the printer display indicates to do so.
Note:
A 2F52 error usually occurs when installing a carriage unit in the wrong model printer. However, in some cases, this error code can occur when a short circuit is detected between the Carriage Relay PCB/Main Controller PCB and the print head/s.
* Latest Firmware version as of this publication date:
iPF6300 : Ver.1.25
iPF6350 : Ver.1.25
iPF8300 : Ver.1.26
iPF6300S: Ver.1.08
iPF8300S: Ver.1.09
Bookmarks