Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Oct 2012
    Posts
    27
    Rep Power
    24

    Canon Imagepress C1 error code E000070-0101/0201

    What does this error code mean E000070/0101 and E000070/0201 on the canon Imagepress C1??? Thank´s.

  2. #2
    Service Manager 10,000+ Posts
    Canon Imagepress C1 error code E000070-0101/0201

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon Imagepress C1 error code E000070-0101/0201

    Quote Originally Posted by eusouopiu View Post
    What does this error code mean E000070/0101 and E000070/0201 on the canon Imagepress C1??? Thank´s.
    ------------------'
    E070 = Error in detecting ITB HP sensor-

    xx=01
    : ITB home position sensor B, xx=02: ITB home position sensor A; only at ITB 1/1 speed; XX=00: no distinction
    01xx = The period of time between when the home position of the ITB is detected and the next home position is detected is shorter than specified (-5% of standard duration). (884 msec or less)
    Turn off the main power, check the drive of ITB, and then, turn on the main power
    02xx = The period of time between when the home position of the ITB is detected and the next home position is detected is longer than specified (+5% of standard duration). (939 msec or more)
    Turn off the main power, and check to see if there is any scratch on the surface of the ITB; then, turn on the main power.

    --Check PS2 (ITB Home Position Sensor B) in I/O Mode, DCON Address P002 bit 9, to confirm the patch is being read.

    If the patch is not being read check the PS2 wire harness from the DC Controller (J1193A pin 15 to J3401A pin 2 on the Side Driver PCB and J3403 pin 2 on the Side Driver PCB to frame connector J251L pin 2). Clean sensor PS2 or replace it if the wire harness and connectors check good.

    If the patch is being read check the ITB Assembly and ITB drive for slippage.

    Check if the Primary Transfer Pressure Lever is engaged.

    The above picture shows the Primary Transfer Lever in the engaged position.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Aug 2013
    Location
    mosul
    Posts
    33
    Rep Power
    0

    Re: Canon Imagepress C1 error code E000070-0101/0201

    hi all
    i want ask about where is (ITB Home Position Sensor B) and PS2 sensor
    thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here