Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts
    E0202-0101 on iradvc5255


    Join Date
    Jun 2010
    Posts
    239
    Rep Power
    30

    E0202-0101 on iradvc5255

    I have the error code E0202-0101 on IRADVC5255 whenever the single pass DADF is used. Tried cleaning the CIS rail and lubricate without success. Having taken ADF covers off the copies did not throw up the code but noticed that the ADF pickup motor vibrates and its timing belt threw black dust under motor shaft. Have ordered the motor/belt and reader controller pcb just in case. Any known fix for this error code would be welcome from the top guys.

  2. #2
    East Coast Imaging 2,500+ Posts
    E0202-0101 on iradvc5255

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69

    Re: E0202-0101 on iradvc5255

    Quote Originally Posted by rayjeek View Post
    I have the error code E0202-0101 on IRADVC5255 whenever the single pass DADF is used. Tried cleaning the CIS rail and lubricate without success. Having taken ADF covers off the copies did not throw up the code but noticed that the ADF pickup motor vibrates and its timing belt threw black dust under motor shaft. Have ordered the motor/belt and reader controller pcb just in case. Any known fix for this error code would be welcome from the top guys.

    E202 0101 04 Title Glass HP error (This error occurs on Duplex Color Image
    Reader Unit-B1 only)
    Description Glass error when moving to the left side for HP check
    operation
    Remedy 1. Turn OFF and then ON the power.
    2. Check the drive of Glass Shifting Motor. (Set the
    service mode: FEEDER > FUNCTION > MTR-CHK > 7.
    Then, set FEEDER > FUNCTION > MTR-ON.)
    3. Check the flag position of Scanner Home Position
    Sensor and Scanner Unit.
    4. Replace the Reader Controller PCB

    I also sent you a PM message.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  3. #3
    Senior Tech 100+ Posts
    E0202-0101 on iradvc5255


    Join Date
    Jun 2010
    Posts
    239
    Rep Power
    30

    Re: E0202-0101 on iradvc5255

    Thanks for the info but this 2nd generation MFD has in FEEDER MOTOR PARTCHK only 0-2 motors.

  4. #4
    East Coast Imaging 2,500+ Posts
    E0202-0101 on iradvc5255

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69

    Re: E0202-0101 on iradvc5255

    Quote Originally Posted by rayjeek View Post
    Thanks for the info but this 2nd generation MFD has in FEEDER MOTOR PARTCHK only 0-2 motors.
    Ok.

    So your MFD is the E1, Correct?

    There is E1 & F1 MFD

    This shot is from the E1 service manual.

    Glass Shift Control
    This equipment has a scanning glass on the undersurface of the scanner unit.
    A standard white plate is attached to this scanning glass for shading correction and dust
    detection correction.
    The Reader Controller drives the Read Motor (M3) on a timely basis to shift the canningGlass.
    This enables the reader controller executing above-mentioned correction by comparing
    reflection data between the position of standard white plate and the position for image
    scanning.




    Error code:

    E202 (Error in scanner home position)
    -0101 Error at the glass home position detection operation (outward)
    -0102 Error at the glass home position detection operation (homeward)
    Attached Images Attached Images
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: E0202-0101 on iradvc5255

    Quote Originally Posted by rayjeek View Post
    I have the error code E0202-0101 on IRADVC5255 whenever the single pass DADF is used. Tried cleaning the CIS rail and lubricate without success. Having taken ADF covers off the copies did not throw up the code but noticed that the ADF pickup motor vibrates and its timing belt threw black dust under motor shaft. Have ordered the motor/belt and reader controller pcb just in case. Any known fix for this error code would be welcome from the top guys.
    If it has only an E202-0101 error then Drive Belt XF2-1605-640 has probably got stripped teeth and is all it needs, if the Error List includes E302-0101 then the DADF Controller may also be required.

  6. #6
    Senior Tech 100+ Posts
    E0202-0101 on iradvc5255


    Join Date
    Jun 2010
    Posts
    239
    Rep Power
    30

    Re: E0202-0101 on iradvc5255

    Problem solved. Replaced only the timing belt as mentioned by canonbundy.

  7. #7
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: E0202-0101 on iradvc5255

    Quote Originally Posted by rayjeek View Post
    Problem solved. Replaced only the timing belt as mentioned by canonbundy.
    Good stuff Rayjeek.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here