Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Technician
    Join Date
    Jul 2013
    Location
    palakkad, kerala
    Posts
    25
    Rep Power
    12

    error E020-1060 canon IRC 2220

    After replaced imaging units( y,m,c,k) above mentioned error has appear, any one can help me to fix this error please.....

  2. #2
    Service Manager 10,000+ Posts
    error E020-1060 canon IRC 2220

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,824
    Rep Power
    227

    Re: error E020-1060 canon IRC 2220

    Quote Originally Posted by mohd sadiq View Post
    After replaced imaging units( y,m,c,k) above mentioned error has appear, any one can help me to fix this error please.....
    \\\\\\\\\\\\\\\\\\\

    clean the Dustproof Glass

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Service Manager 10,000+ Posts
    error E020-1060 canon IRC 2220

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,824
    Rep Power
    227

    Re: error E020-1060 canon IRC 2220

    Quote Originally Posted by mohd sadiq View Post
    After replaced imaging units( y,m,c,k) above mentioned error has appear, any one can help me to fix this error please.....
    ------------------------------
    see above about cleaning the DUSTPROOF GLASS FIRST


    E020 0160 = ATR patch failed to be created correctly or Patch Sensor error
    High density for the target at patch detection
    1. Check the patch shape.
    2. Clean the high voltage contact point with dry wiping or air blower.
    3. Check the harness/connector between the DC Controller (UN09) and the High Voltage PCB.
    --Between the DC Controller PCB (UN09/ J21) and the Primary Charging High Voltage PCB (UN06/ J441, J442)
    --Between the DC Controller PCB (UN09/ J21, J22) and the Developing High Voltage PCB (UN07/ J451, J452)
    --Between the DC Controller PCB (UN09/ J19) and the Auxiliary High Voltage PCB (UN08/J461, J462)
    --Between the DC Controller PCB (J205) and the Primary
    Transfer High Voltage PCB (UN04/J1001)
    4. Replace the Drum Unit (M)
    5. Replace the Registration Patch Sensor Unit
    6. Replace the ITB Unit.
    7. Check conduction of the fuses (FU5, FU8) in the DC Controller PCB (UN09).
    8. Replace the Primary Transfer High Voltage PCB (UN04)
    9. Replace the Developing High Voltage PCB (UN07)
    10. Replace the Primary Charging High Voltage PCB (UN06)
    11. Replace the Auxiliary High Voltage PCB (UN08)
    12. Replace the DC Controller PCB (UN09
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Field Supervisor 500+ Posts Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    962
    Rep Power
    33

    Re: error E020-1060 canon IRC 2220

    OK, I'm having this problem after replacing the drums. And I have a couple of questions.
    I cleaned inside the machine as much as I could. I tried to use the open laser shutter program and it came
    back with an "NG" message. Same thing for the patch sensor shutter. I looked it over without removing the
    assembly, the linkage seems to be in place. So I taped the patch shutter open and still got the code.
    I did see the patches on the end of the t-belt.
    They looked ok, about .5 inch square. The patch sensors looked clean so I cleaned them again.
    I had trouble with the laser glasses. Not sure if I cleaned them well enough. I ran the open shutter
    program and like I said it came back with NG.
    I have downloaded the tech bulletins, this should keep me busy for awhile. Hope this fixes the damn thing.
    It seemed to run so well for the last 8 months.
    I did put the old yellow drum in and it came up with the same error code except it was for the magenta drum.
    Like it going right down the line. I bet if I put the old magenta drum back in the machine would code out only
    indicate the cyan drum.

    firmware

    DC-Con 67.05
    panel .03
    ECO 43.34
    mn-cont 46.01

    There's more but I think this is the important stuff. Let me know if not. I will see this machine again tomorrow.
    I went through the Misc P print listing and nothing has changed in the Adjust Lv 1 and 2. Same with the options.

    Any more info or other tech letters on this would be helpful
    Thanks

    DR

  5. #5
    Service Manager 10,000+ Posts
    error E020-1060 canon IRC 2220

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,824
    Rep Power
    227
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Field Supervisor 500+ Posts Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    962
    Rep Power
    33

    Re: error E020-1060 canon IRC 2220

    Teckat,
    Thank you for the PDF's. I'm sure they will come in handy. I did fix the problem by re-using the old chips and made a note in the log
    for the life counts. I was afraid I was going to be all day pulling out the laser assy.
    After I replaced the chips the programs for the shutters started working. Probably something to do with
    the error code.
    The copy quality is very good now and the customer will not use aftermarket toner in the future.
    And I even got paid the same day.

    Thanks again and have a nice weekend.

    DR

  7. #7
    Service Manager 10,000+ Posts
    error E020-1060 canon IRC 2220

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,824
    Rep Power
    227

    Re: error E020-1060 canon IRC 2220

    Quote Originally Posted by Desert Rat View Post
    Teckat,
    Thank you for the PDF's. I'm sure they will come in handy. I did fix the problem by re-using the old chips and made a note in the log
    for the life counts. I was afraid I was going to be all day pulling out the laser assy.
    After I replaced the chips the programs for the shutters started working. Probably something to do with
    the error code.
    The copy quality is very good now and the customer will not use aftermarket toner in the future.
    And I even got paid the same day.

    Thanks again and have a nice weekend.

    DR

    Welcome 👌
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Service Manager 2,500+ Posts
    error E020-1060 canon IRC 2220

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    3,291
    Rep Power
    60

    Re: error E020-1060 canon IRC 2220

    Quote Originally Posted by Desert Rat View Post
    Teckat,
    Thank you for the PDF's. I'm sure they will come in handy. I did fix the problem by re-using the old chips and made a note in the log
    for the life counts. I was afraid I was going to be all day pulling out the laser assy.
    After I replaced the chips the programs for the shutters started working. Probably something to do with
    the error code.
    The copy quality is very good now and the customer will not use aftermarket toner in the future.
    And I even got paid the same day.

    Thanks again and have a nice weekend.

    DR
    The trouble with using old chips on the drum dums is the drum life will be dramatically shortened. The machine changes the drum charge depending on the chip life!

    If you get any E020 xxxx errors after changing the drum, clean the laser glass if this doesn't help replace the ITB. A worn ITB does not create clear patches that the machine can read so throws this error.
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  9. #9
    Field Supervisor 500+ Posts Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    962
    Rep Power
    33

    Re: error E020-1060 canon IRC 2220

    Hopefully it will last for a while. I did run the ITB cleaning program a couple of times.
    I am still in the dark as to why using the old chips stopped the codes???
    I did post the firmware in the machine, is it new enough?
    I was thinking that the new drum chips were not compatible with the firmware?
    I did save the new chips. Is there a way to reset the old ones or would that be a
    a waste of time?
    But I suppose the ITB will have to be changed at some point. It was at 82% of life used.
    It seemed to look ok. I could see that it was not new but it did not look that bad.
    Would cleaning it with alcohol do any good as far as getting the surface scum off? But there
    are still some wear lines that match the lines on the yellow drum. Has anyone taken one apart and
    cleaned the rollers with any good results?

    DR

    Yeah I over think things sometimes.

  10. #10
    Field Supervisor 500+ Posts
    error E020-1060 canon IRC 2220

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    781
    Rep Power
    35

    Re: error E020-1060 canon IRC 2220

    And dont forget to clean the Polygon Mirror as well! Had this several Times
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here