Canon IR7086 - Shows Error Code E0602-0113 While printing

[sham.panhale]

Dear Sirs ,
I have 2 Copiers IR7086 . One Copier Shows error code frequently. I am in remote area no technicial can visit for repair.
So I am here for help . I know the error is reagrding the hdd ,One of a techincan told me to do some thing like scan disk on phone.
But still the problem exist .


I have some question .

1. I have attached the configuration page of both copiers ( working and faulty ) , If I perform the copy the exact Image of the working Copier to a new HDD is it going to work ?
2. If not then what i need to do ?

Also Attaching the Error Description page from manual .


Plsssssssssssss help me

[Canon.Tech]

Yes the HDD is failing. You can clone one HDD to another providing it is from an identical machine, but even then it’s not 100% safe.

Your best bet is to get the firmware & install in on a new HDD.

[sham.panhale]

Thank you for your reply .
Do u have the firmware ? Can u send me the link on mail ?
More important .. a person like me who has not much knowledge of firmware upgrate can do it ?

And sir what do u mean by it's not 100% safe ?


Thanks for reply again ..
Awaiting for replay .

Yes the HDD is failing. You can clone one HDD to another providing it is from an identical machine, but even then it’s not 100% safe.

Your best bet is to get the firmware & install in on a new HDD.

[sham.panhale]

I am sorry If I am asking too much

Yes the HDD is failing. You can clone one HDD to another providing it is from an identical machine, but even then it’s not 100% safe.

Your best bet is to get the firmware & install in on a new HDD.

[Canon.Tech]

Hi, try clonng the drive first, what I say not safe I mean it is not 100% gauranteed to work.

I fimware is a huge file too big to send

[sham.panhale]

Sure .. i will try it ..
I will let u know ..
BTW can i use harddrive of different capacity ?

Thanks

Hi, try clonng the drive first, what I say not safe I mean it is not 100% gauranteed to work.

I fimware is a huge file too big to send

[Canuck]

Get a new hard drive from Canon. Then you need to get the firmware(USB format),load it onto a flash drive and install the operating system. Any old hdd won't do. It has to be formatted and partitioned properly. Not NTFS

[sham.panhale]

O my God ..

1. Buy a harddrive from Canon ? I think it is not possible in my poor India .. Even Canon Did not sell this the copiers in market . I brought it reconditioned dear.(3500$ / Copier) .

2. Get The Firmware .. Could you help me to to get it ?

Sir , Are you sure the HDD cloning wont work ?

I am very frustated .. It my One of Own copier .. At this situation it is crap for me ..

Mr. Canon.Tech Told me to try a clone .. I will do that .. And i have ordered a new HDD .

But In the mean time could you please help me can you suggest any alternet solution ???


Thanks for your reply .

Get a new hard drive from Canon. Then you need to get the firmware(USB format),load it onto a flash drive and install the operating system. Any old hdd won't do. It has to be formatted and partitioned properly. Not NTFS

[Canuck]

There are checks that a trained tech can do in service mode to try to recover it. Get a tech

[aakash@24]

O my God ..

1. Buy a harddrive from Canon ? I think it is not possible in my poor India .. Even Canon Did not sell this the copiers in market . I brought it reconditioned dear.(3500$ / Copier) .

2. Get The Firmware .. Could you help me to to get it ?

Sir , Are you sure the HDD cloning wont work ?

I am very frustated .. It my One of Own copier .. At this situation it is crap for me ..

Mr. Canon.Tech Told me to try a clone .. I will do that .. And i have ordered a new HDD .

But In the mean time could you please help me can you suggest any alternet solution ???


Thanks for your reply .

first of all dont call your country poor.this brings shame to all of us.Buy a HDD from delhi for as low as 13$.(Rs 900)