turn on machine and code comes up for 15 seconds or so and machine turns off.help please.thanks ahead of time.
turn on machine and code comes up for 15 seconds or so and machine turns off.help please.thanks ahead of time.
Inspect unit before an ERROR CLEAR
E002 - inadequate rise in temperature of fixing unit
= 0003/ The output of the non-contact thermistor TH1 does not reach 90°C within 180 sec after it has reached 60°C
remove fix unit > check for paper wrap around roller
service mode
COPIER>FUNCTION<CLEAR>ERR
Clears error codes.
(Cleared error codes: E000, E001, E002, E003, E719)
Operation method
1) Select this item, and press the OK key.
2) Turn the main power OFF/ON.
FIX UNIT.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC
Bookmarks