print not fusing during A3 printing

**aakash@24** · 10-13-2013

I am facing this problem in ir 2870.The print on A3 copies rear side washes off.Changed fuser but the problem still persists.

**Canon.Tech** · 10-13-2013

Try increasing the temp COPIER>OPTION>BODY>TEMP set to 7 (default is 0)

**canonbundy** · 10-13-2013

Originally Posted by aakash@24

I am facing this problem in ir 2870.The print on A3 copies rear side washes off.Changed fuser but the problem still persists.

Definately the Fixing Unit, check for uneven pressure of the Pressure Roller Bushings - replace the Fixing Film Assy.

**Cabo** · 10-13-2013

Tray this
COPIER > ADJUST > DEVELOP> DE-OFST> Enter 25 (default 0)

**SAZ911** · 10-14-2013

Originally Posted by aakash@24

I am facing this problem in ir 2870.The print on A3 copies rear side washes off.Changed fuser but the problem still persists.

i would check the fixing film assy, check if it is torn on the one side and has shifted to one side, had this issue a lot.

i recommend you replace both the fixing assy and the pressure roller if there is an issue with the fixing assy.

good luck....