Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts Jerrygbs's Avatar
    Join Date
    Dec 2008
    Location
    grantville, ga
    Posts
    191
    Rep Power
    0

    Canon ir3230 error code e0227-0003

    My office is saying reader power supply. Problem intermittent cable from copier to reader looks fine any ideas?

  2. #2
    Senior Tech 100+ Posts HELIO240's Avatar
    Join Date
    Jan 2011
    Location
    BRAZIL
    Posts
    137
    Rep Power
    0

    Re: Canon ir3230 error code e0227-0003

    Hi, the error 227-0003 make a reference the a fault of the tension alimentation 24 vdc in the pcb of reader. Check the connection j2027 in the pcb MAIN CONTROLLER, check the pcb of controller reader j5 in the reader unit 24vdc.

  3. #3
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    682
    Rep Power
    44

    Re: Canon ir3230 error code e0227-0003

    Product : imageRUNNER 3245i / 3245 / 3235i / 3235 / 3230 / 3225
    Title : E227 Error Code

    Error :
    The imageRUNNER is producing an error code of E227. This may be caused by a lack of 24 volts to the Reader Controller.

    Workaround :
    Check the 24 volt supply to the Reader Controller at J501. If 24 is not present, check J535 from the Relay PCB. If 24 Volts is not present at J535 on the Relay PCB, the problem may be the 24 Volt Power Supply. The 24 Volt Power Supply sends 24 volts to the relay PCB, at J539. In this case replacing the 24 Volt Power Supply, resolved the E227 error.

    The part number for the 24 volt Power Supply is FK2-6317-000.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here